Quote:
|
Originally Posted by mptoledo
I just cleaned my thottle body and noticed on my 2001 "s" that it had a curved throttle body(no splitter of course). After 60k miles it there was very little carbon build up. I don't know if it was due to the previous owner always using chevron w/techron gas, or just driving habits.
I am still very interested in the dyno of pedro's to see true HP gain.
Curious of how they secure the "splitter" in there. Is it epoxy or what?
|
... the claims are: peak of 6 to 8 more ft-lbs of torque at 900 less RPMs and a 1.5-2 better MPG at cruising speeds.
The HP curve should not change at all.
HP is made at the higher RPM range, where the car is sucking in 7,500 liters of air per minute (at 6000 rpm). With that volume of air the TechnoTorque doesn't do anything.
Torque is made at half that speed and is really needed below 3000 rpm, especially from idle where the car is only taking in 1,000 liters of air per minute (for a 2.5 liter engine). It's with these smaller volumes of air where we can gain a little efficiency and thus generate more torque.
Happy Boxstering,
Pedro