[Viper5]

So today I finally got around to cleaning up my engine. I used Engine Brite Gel by Gunk. It was done rather sloppy. I simply sprayed the chemical on the top of everything. I didn't do it liberally, but as much as I felt was necessary. I then took a rag and wiped down as much as I can. There wasn't much electrical that I worried about (I didn't cover anything up) and I didn't spray that much where the air intake is. I then hosed everything down being careful not to get too much water in that area. Then took it for a ride so it could dry off. Here are before and after pics. You can notice that there are areas of dust that I didn't get to. Just mainly the top and sides is what I cleaned. I will maybe get to the other areas another day.