Quote:
Originally Posted by eightsandaces
Just ordered the new mount from suncoast, I also ordered the tabs, my theory being they would be distorted from vibration. Total was $212, after doing some searches I'm convinced the mount is bad, apparently it's a very common failure.
Anyone who has installed one please weigh in, I figure you support the engine and plug and play but again ant tips would be sweet..
|
I had my motor mount replaced on my 2001 at 58k miles, and it did help smooth out an annoying 3k rpms vibration I used to have when decelerating, but I never had any chattering in my clutch. The new motor mount had absolutely no effect on my clutch action, and it still feels exactly the same as it did before. I can see how a new mount would improve shift action, but not sure how it would affect your clutch takeup.
I also had a really annoying grinding noise when making turns under power, and the new motor mount fixed that. Apparently, the old mount was so worn that it upset the drivetrain geometry.
Here's a how to on changing the motor mount:
http://www.pedrosgarage.com/Site%203/Install%20Front%20Engine%20Mount.html