View Single Post
Old 12-29-2008, 12:22 PM   #9
turbo23dog
Registered User
 
Join Date: Jan 2006
Location: Northern VA
Posts: 238
Here's a few pictures from when I replaced the front motor mount on our 2000S in April 2008

The one shows how the rubber mount was cracked around the circumference of the mount. I used a screwdriver to spread open the cracked rubber to make it obvious what was wrong.



The next pix shows a comparison of the old mount with the new one, shown on the left. This new mount is slightly modified from the original and the part number is: 987 375 023 04



I paid $207 (including sales tax) from a local dealership here in No VA.

It took about 3 hours start to finish doing the repair in my driveway. As already mentioned, Pedro's site and others have good write ups for the proceedure.

And no, I could not see that the mount was bad untill I pulled it from the car. I went on strong gut feeling that the mount was bad and bought from the local dealership ahead of time rather than order over the internet, thinking that it would be easy to return it if I was wrong. As you can see, I guessed right.
__________________
Rich F
somewhere
past: 2000 Boxster S
past: 2010 Boxster S

Last edited by turbo23dog; 12-29-2008 at 12:41 PM.
turbo23dog is offline   Reply With Quote