986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

renzop · 03-12-2008, 02:50 PM

No the bolt pattern diameter is wrong. You need 130mm not 114.3. In general SSRs work best on Japanese cars. Lots of Japanese cars use 5x114.3.

Ooops. I went to the site and it looks like they do have 5x130. But to be hones I don't know if the center bore and offsets work for the Boxster. In my 17" size they would be about 1/4" too far in.

03-12-2008, 02:50 PM	#5
renzop Registered User Join Date: Nov 2007 Location: PA Posts: 246	No the bolt pattern diameter is wrong. You need 130mm not 114.3. In general SSRs work best on Japanese cars. Lots of Japanese cars use 5x114.3. Ooops. I went to the site and it looks like they do have 5x130. But to be hones I don't know if the center bore and offsets work for the Boxster. In my 17" size they would be about 1/4" too far in. Last edited by renzop; 03-12-2008 at 02:58 PM.