Last Step
5. Replace the trottle body with the 4 hex bolts. Careful not to overtorque as they are into a metal sleve in plastic. Just hand tight then nip them up.
6. Replace intake tube. It can be a little difficult to get the end back on the throttle body so I used just a little WD 40 or CRC on the inside lip to help it slip back on.
7. Tighten both end clamps of intake tube & start her up.
8. Replace engine cover & return hood to normal position & your done.
Quite easy to do and should only take you about an hour or so from do to wow.
If you have any questions PM me.
Good luck.
Last edited by aussieboxy; 08-18-2007 at 12:38 AM.
|