ok after letting it seat for a while I started it up and it ran for about 20 mins no problems long enough for me to drive it to get the codes read. It seems it gave . So here is the end of the story it cool down and started with out a problem . The codes I was referring to are (P0102)- Mass or Volume air flow A circuit low amp and (P1691) Manuf. controlled computer output circuit . I think by letting the MAF cool down for some reason it allowed for it to start with no problem. Like I said though one was ordered for 200 on EBAY and will be replaced sometime next week. Thanks for the help
Last edited by clb0099; 08-02-2007 at 03:17 PM.
|