986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

zackwatt · 08-01-2007, 09:16 PM

>Step Three: Unbolt and Remove Seatbelt Mechanism
Slide the Orange switch outward to Unlock the wire harness. Then, gently pull off the harness

Next, Unbolt the Mechanism

After removal of the bolt the Mechanism is still held on my a 3/4 inch "rod"
To remove, pull away and outward from the roll bar. There is JUST enough room to do this.

Thats It!!!

These are the parts left over required to install new seat belts

Overall this was a really, really, easy job. I hope I have motivated some of you to replace your seat belts with some new fancy ones. Good Luck

08-01-2007, 09:16 PM	#2
zackwatt Registered User Join Date: May 2007 Posts: 165	>Step Three: Unbolt and Remove Seatbelt Mechanism Slide the Orange switch outward to Unlock the wire harness. Then, gently pull off the harness Next, Unbolt the Mechanism After removal of the bolt the Mechanism is still held on my a 3/4 inch "rod" To remove, pull away and outward from the roll bar. There is JUST enough room to do this. Thats It!!! These are the parts left over required to install new seat belts Overall this was a really, really, easy job. I hope I have motivated some of you to replace your seat belts with some new fancy ones. Good Luck __________________ http://img412.imageshack.us/img412/9591/65zxg8pcz4.jpg 2002 Boxster S Guards Red/Black Hacks: De-Snorkeled, Clutch Swich, Debadged, Red Seatbelts, Painted Bumperettes, 986S Badge, EVO Intake, SuperSprint Exhaust, Fabspeed Cat Bypass My Car: http://s220.photobucket.com/albums/dd74/zackwatt/ Last edited by zackwatt; 08-01-2007 at 09:33 PM.