![]() |
My silver 99 Boxster - UK
Now that I've had a chance to Polish her and fit a few goodies I thought I'd post up some photos.it was starting to get dark so there not the best but at least the rain had stopped long enough to take them!
http://986forum.com/forums/uploads01...1451863120.jpg http://986forum.com/forums/uploads01...1451863212.jpg http://986forum.com/forums/uploads01...1451863230.jpg http://986forum.com/forums/uploads01...1451863245.jpg http://986forum.com/forums/uploads01...1451863258.jpg http://986forum.com/forums/uploads01...1451863270.jpg http://986forum.com/forums/uploads01...1451863281.jpg http://986forum.com/forums/uploads01...1451863293.jpg http://986forum.com/forums/uploads01...1451863307.jpg http://986forum.com/forums/uploads01...1451863318.jpg |
Lovely! Good optional extras of the centre console colour coded, and red seatbelts too.
But please take that S badge off :) |
Seconded. Unless you put a 3.2 in it, you're just a poser.
|
The s badge will be coming off, previous owner put it on but im waiting on a new boxster badge coming before removing it as its going to leave marks!
To be fair though it has been remapped and is putting out more power than a stock 2.5 so it would actually run with an s without any issue as was discovered on sunday by a chap in a 2001 carrera 4s lol! |
Quote:
Its got the leather trimmed dash and also the silver dials as well. The wheels were also the 17" optional upgrade. |
The S is off centre so there's no need for a new badge - just pick it off and use polish to remove the remnants :)
The 2.5's still a quick car, but unless it's 1.5 seconds quicker to 60mph and 60bhp more than stock then I'm not sure about it running with an S without an issue! Still a great car though don't get me wrong. I just wasn't sure if that was you justifying keeping the 'S' ;) Very jealous of that centre console and red belts though. What's your plans? |
Btw. the maker of the front spoiler seems to be GT3Tek
Gt3tek | Gallery |
The front spoiler is this Duraflex one, I have been considering one so it is good to see it on the car, I like the 'rolled under' center:
|
Quote:
The B should be positioned 285mm from the left edge if it's a boxster 2.5 or 2.7 but if it's a boxster S the B is positioned 245mm from the left so that the complete badge is centrally on the boot lid. If I just take the S off the boxster writing will sit too far left as the previous owner who fitted it changed the whole badge and fitted it correctly. See extract below from the service manual :) http://986forum.com/forums/uploads01...1452027663.jpg As for power, I'm unsure exactly what's been done to it but I know for sure it's been mapped and it's much much quicker than my 2.7 was. All I can say is that I was slightly behind the 996 and we both floored it in 3Rd from around 40mph and I reeled him in. I was surprised to say the least as I genuinely thought I'd have struggled to hang with him never mind actually close in on him! I know the engine has been out of my car at some point so for all I know it may have had internal work, actually thinking about it I don't even know if it's actually a 2.5 lol it could easily have been swapped out as it's clearly had money thrown at it in the past. That would certainly explain a few things! |
Quote:
Well found! That's definitely my front lip! |
I meant look at your badge now from that photograph. Yours is already too far over to the right because of the added 'S' badge. Removing that will make the 'Boxster' central again.
That would definitely explain a few things. |
Quote:
As for plans, I have a few but next up is brakes as the discs are shot. I also just ordered new condensers and a radiator as there past it and have leaked and my drivers side coolant rad has a slow leak. Tonight before the rain came on I fitted some porsche side stripes which were a nightmare to do because of my sideskirts. I'll try and get some photos tomorrow but I'm not sure if I like them or not. I've really just been concentrating on getting all the little age related niggles fixed for now, well apart from doing all my lights of course! I also need to get a proper look and see if I can work out what's been done to make it so quick but it's been to wet to get the Roof into service mode and open the engine bay up fully for a poke around. |
The 2.5 looks very different from the 2.7. If you pulled the engine cover off to look you'd know what was in there.
|
Quote:
Might get into it this weekend though as I have an occasional squeak from the starter I need to sort as it's doing my head in! |
Quote:
And yeah, this weather's awful :( I've been meaning to change my spark plugs & coil packs for a week and haven't had a single chance. And I was off for the whole week too! Quote:
|
Heres hoping! Lol!
I've had plenty of quick high powered cars previously so I know what "feels" quicker than it should if that makes sense. I'd be very surprised if just a remap makes a stock 2.5 feel this good otherwise everyone would be doing it! |
Quote:
|
Quote:
|
Quote:
|
Quote:
|
All times are GMT -8. The time now is 05:34 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website