V8 Conversion
Hey guys, I'm just starting to work on a Boxster V8 conversion and I thought I'd share my build with you. My name is Vlad, and I'm a 27 year old Mechanical EIT from Toronto, Canada. This is my first Porsche and first car build, so please bear with me. If this is something you are interested, please also check out BoxsterLS376's build. His thread has been an amazing resource, and it's one of the reasons I started my project. Hopefully I will have some unique content to offer, as I am doing this on a budget. I'm currently unemployed, so every penny counts here.
PS you can also follow this buil on my blog at rollingshell.com or instagram at PorscheLSX http://rollingshell.com/wp-content/u...91-600x399.jpg |
Hi Vlad
Looking forward to learning more about your build! Thanks for the shout out :) Care to lay out the basic details of the build for us? Good luck! J "BoxsterLS376" |
Quote:
PS I forgot to mention in the intro, the car is a 2000 Boxster S roller |
The first thing that I bought was an engine. Jalopnik had a gret guide on how to build an LS engine on a budget, so I decided to go that route. I first picked up an LM4 aluminum block from a 2004 Envoy XL. The guy at the scrap yard said that it was tested and had great compression, so I couldn't pass it up for the price.
http://rollingshell.com/wp-content/u...17-600x450.jpg I spent the following week tearing it apart and cleaning. The engine looked good, but it did have some rust. I managed to snap a couple of exhaust manifold bolts which was a major pain (you can see more pics on the blog) http://rollingshell.com/wp-content/u...23-600x450.jpg I got a whole bunch of NPT fittings from my dad and put together a leakdown tester to see how good the engine internals were. To my surprise it pretty much had 0 compression. You could hear the air rushing out pretty much everywhere. At this point I decided to take off the heads and clean up the valves to see if that would solve the problem. http://i.imgur.com/2WNAC1B.jpg?1 http://i.imgur.com/yMkyF1D.jpg?2 |
At this point I'm really considering abandoning the drive by wire setup and going with a throttle cable. Staff at Renegade told me that its easier to use DBW since you just plug in some wires, but it doesn't seem to be the case. Most people use LS3 crate engines for their swap with respective throttle bodies, ECUs, and harnesses. In my case I got a truck engine which I'm trying to convert to a car engine. This pretty much leaves me with one option: an overpriced C5 Corvette TB, harness, ECU, TAC module and pedal, unless I want to make some Frankenstein setup of mixed parts. Personally I don't have enough experience with wiring to do that, and even the tuning guys told me to go with cable throttle. I guess I'll sleep on it tonight and see how I feel tomorrow morning. Meanwhile does anyone have any pictures of how the old Boxsters had the cable throttle routed?
|
Maybe try ********************************************.com
|
Quote:
|
I took the heads apart and as expected the valve faces and seats were pretty gunked up and pitted, not to mention all the crap and leaves that were in the cylinders. Since I didn’t have money to get the valves recut, I decided to lap them. Most people are against this, but this is a budget build, so screw it. I used a hand drill and a little piece of air hose to do the job. Again, most people advise against this, but there was way too much pitting to do it by hand.
|
Here are some pictures of my car. It took me a while to find a good one actually. I posted several wanted posts on Kijiji, and signed up for notifications on eBay and every major city on Craigslist. A few things came up here and there in the States, but nothing really worth the drive and hassle of importing it to Canada. After a couple of months of searching I found this best. I actually bought it from one of the guys on this forum. Had to drive to Ottawa to pick it up, but it was worth it. It looks pretty bare in the pics, but thats actually how I wanted it. I'm pretty much trying to make a street legal track car.
|
Looks good man - keep up the good work!
|
Are you keeping the interior stripped? My vote is yes, but it's your car. It looks like you're missing everything but the dash anyway.
|
Quote:
|
I did another leak-down test after lapping the valves. This time the results were better, but pretty inconsistent. The leakage numbers were between 5 and 25%, and you could clearly hear the air escaping past the piston rings. I decided that continuing forward would cost me much more than what I paid for the engine, so it went back to the scrap yard for a refund.
For the next engine I spent a little more and got an L33 aluminum block. These came with 799 heads, which are pretty much the same as the ones that came on LS6 Corvette engine, minus the sodium filled valves. It was a little overpriced at $1200 CAD, but I couldnt afford to sit around waiting for a good deal. The engine looked pretty clean, and only had 80,000 miles. |
My buddy purchased a soda blaster for his business, which came very handy for cleaning the engine. Definetely not a fun process, but it's worth it. If you are planning on doing this, make sure you do in in a ventilated booth or outside. Lab goggles are also a must!
Before: After: Blasted engine block: |
A bunch of parts I purchased from itsnotanova. Have to make this thing street legal.
|
I had a little downtime waiting on parts, so I made these RS style door cards. You can see more pics of the process on the blog.
|
Hey guys! Not much to update this week as I’m pretty much waiting on 90% of the parts to finish this build. I’m getting everything shipped to the same location in Buffalo to save on border fees. Once my engine mount kit is here, the build should really pick up.
Here are some pictures of my electric power steering conversion. There is no room in the engine bay to run a belt pump, so this conversion is a must! I am using a Vauxhal Astra power steering pump that I purchased from UK. I believe this is the same model pump as Porsche uses in their GT3 cars. The pump itself was pretty cheap, but it’s the shipping that killed me. The pump fits perfectly in the front trunk, on the opposite side of the brake master cylinder. This is a good location, since it won’t take up your trunk space, and its excellent for wiring. Things you will need:
-There are three other small wires, but I don’t think the brown/white one is used for anything. You need +12 in the other two wires in order for the pump to run. The best way to do this is to wire the black one to the ignition wire, and the blue/white one the alternator dash light. This will ensure that the pump is on only when the alternator is running. You can also wire one of these to a switch, should you need to turn off your power steering. I used a relay in my setup just to keep the power steering pump separate from the rest of the car wiring. -You will need to figure out a way to hook up the -6 AN return line to the power steering pump. The easiest way to do this is to cut the stainless housing and stretch out the core until it slides over, and then use a hose clamp. This is a low pressure return, so it shouldn’t be a problem. -You will need a custom mounting bracket for the pump. I just got nylon working on my 3D printer, so hopefully I can make something with that. You can see more pictures here. They are not great, but I will update them once the pump pump is in. |
I love your door panels!
|
Quote:
|
Just got off the phone with Renegade, and I got some bad news. They had some issues with the flywheel, so they are currently in the process of redesign. I was told that the prototype is nearing completion, but it will be at least a couple of weeks until it's ready for production. Not really sure what I should tackle now... I got 8 packages waiting for pickup in Buffalo, but there's no point in driving down without the kit. I guess I'll take the time off to get serious with my job search.
If you plan on doing this through Renegade, do yourself a favour and order the kit as early as possible. I placed an order at the end of January and I'm still waiting. Here's a rundown of things that need to be done:
This is all I have for now. Thanks for following guys, and sorry about the lack of updates. Vlad |
All times are GMT -8. The time now is 05:39 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website