BoxsterLS376 introduction - LS3 conversion :)

[BoxsterLS376]

Thanks everyone! @ Itsnotanova - I am with you there, for day to day use I think the sound is spot on... but with as little time as it take to change the exhaust on this it would be nice to have one with a bit more thump to it

Next time I have a chance I am going to pull the mufflers off and fire it up to see just how loud it is then make a decision on how to proceed with a sportier sound. I am also interested seeing how it sounds without an x-pipe to see if it changes the overall sound.

THANKS!
J

[Bigseven74]

Do you have AC working yet?

[BoxsterLS376]

Originally Posted by Bigseven74

Do you have AC working yet?

Not yet, been dealing with more pressing issues...

Everything is in place and should work with the stock lines once they are cut down and re-crimped, then just need to add the right belt and should work...

Until the firewall is built it is like peeing on a brushfire
Thanks
J

[Bigseven74]

Originally Posted by BoxsterLS376

Not yet, been dealing with more pressing issues...

Everything is in place and should work with the stock lines once they are cut down and re-crimped, then just need to add the right belt and should work...

Until the firewall is built it is like peeing on a brushfire
Thanks
J

I'm watching your build. I have a 2003 986S it gone through 2 M96 engines. I have a shop building me a LS1 version now. One thing at I'm doing I haven't seen done yet is use the Atomic LS Wireless Harness kit on my build. Upgrades to the motor before it goes into the car are Cam, pushrod, lifters, springs, and time chain.

Video with last M96 Engine
https://www.youtube.com/watch?v=lEIZorKPkWA