06-21-2015, 10:51 AM
|
#81
|
|
WALDMEISTER
Join Date: Sep 2013
Location: Germany
Posts: 1,362
|
Thanks!
Alu meshes test: 1/3 middle segment version
car might run marginally hotter with full meshes, but I would say neglectable.
With the 1/3 solution, no heat problems at all...but +33% less bugs and debris 
__________________
Original Owner | PORSCHE Boxster 2.7L (MY01) | Seal Gray
Last edited by BRAN; 05-09-2016 at 10:33 AM.
|
|
|
|
06-22-2015, 10:47 AM
|
#82
|
|
WALDMEISTER
Join Date: Sep 2013
Location: Germany
Posts: 1,362
|
PORSCHE 911R...NICE!!
lol...my red stripe design from 2014!
__________________
Original Owner | PORSCHE Boxster 2.7L (MY01) | Seal Gray
Last edited by BRAN; 09-07-2017 at 04:44 AM.
|
|
|
|
|
06-30-2015, 12:51 AM
|
#83
|
|
Registered User
Join Date: Apr 2015
Location: Wiltshire UK
Posts: 21
|
Quote:
Originally Posted by BRAN
|
The Fuchs alloys remind me of my 356 which sold earlier this year [they were not standard on that either as the original had steel wheels]
I have Carrera alloys on my Seal Grey S which are very open.
Shows off the red Brembo's very well. 
__________________
John
|
|
|
|
|
07-02-2015, 08:52 AM
|
#84
|
|
WALDMEISTER
Join Date: Sep 2013
Location: Germany
Posts: 1,362
|
WHAT A BEAUTY! 
Priceless...
congrats, John 
__________________
Original Owner | PORSCHE Boxster 2.7L (MY01) | Seal Gray
Last edited by BRAN; 09-07-2017 at 04:46 AM.
|
|
|
|
|
07-11-2015, 10:25 AM
|
#85
|
|
Registered User
Join Date: Jan 2007
Location: BC
Posts: 1,324
|
I think I have a Grey problem. 
__________________
2001 Boxster, 5 spd, Seal Grey
|
|
|
|
|
07-12-2015, 08:21 PM
|
#86
|
|
Rookie
Join Date: May 2014
Location: Portland Oregon
Posts: 215
|
Crappy cell phone pic but sporting the newly restored smoked headlights and new smoked side markers together. Next shot will be when I add the custom windscreen...
__________________
02 Seal Grey 5 Speed
|
|
|
|
|
08-17-2015, 03:21 AM
|
#87
|
|
WALDMEISTER
Join Date: Sep 2013
Location: Germany
Posts: 1,362
|
__________________
Original Owner | PORSCHE Boxster 2.7L (MY01) | Seal Gray
Last edited by BRAN; 08-26-2015 at 12:26 PM.
|
|
|
|
|
08-17-2015, 06:00 PM
|
#88
|
|
Registered User
Join Date: Aug 2015
Location: Pennsylvania
Posts: 8
|
2004 S with 78k
Had her for two weeks and just got a clean bill of health from local Porsche tech  
|
|
|
|
|
08-18-2015, 02:28 AM
|
#89
|
|
Registered User
Join Date: Nov 2008
Location: Wilton, CT
Posts: 195
|
Very nice! Enjoy!
__________________
2001 Boxster S 6-speed, 2013 Boxster S PDK
|
|
|
|
|
08-18-2015, 05:06 AM
|
#90
|
|
Registered User
Join Date: Sep 2012
Location: S. New Jersey
Posts: 1,239
|
Welcome to forum, Porsche Boxster and Seal Grey
I do love the color
Mine just turn 80k
__________________
2002 S - old school third pedal
Seal Grey
|
|
|
|
|
08-22-2015, 04:25 PM
|
#91
|
|
Rookie
Join Date: May 2014
Location: Portland Oregon
Posts: 215
|
I think lowering my Seal Grey deserves a before and after...
Before.....
After.....
__________________
02 Seal Grey 5 Speed
|
|
|
|
|
08-23-2015, 01:14 AM
|
#92
|
|
WALDMEISTER
Join Date: Sep 2013
Location: Germany
Posts: 1,362
|
Quote:
Originally Posted by TypeA
I think lowering my Seal Grey deserves a before and after...
|
Looks fantastic!
Tell us more about your new wheels and suspension (and your fleece seat covers )
__________________
Original Owner | PORSCHE Boxster 2.7L (MY01) | Seal Gray
|
|
|
|
|
08-23-2015, 07:10 AM
|
#93
|
|
Rookie
Join Date: May 2014
Location: Portland Oregon
Posts: 215
|
Quote:
Originally Posted by BRAN
Looks fantastic!
Tell us more about your new wheels and suspension (and your fleece seat covers ) |
Tires and wheels were a screamin deal on craigslist. 19" SSR GT3 rims wrapped in Michelin Super Sports with about 70% tread remaining, came off a 911 and the offset required 10mm spacers in the rear to fit. I also got new chrome lug bolts as the stock bolts werent long enough after I added the spacers. They did not come with the center caps and I seriously considered the brushed aluminum "SSR" center caps but at, IIRC, $200+ for the set it just wasnt worth it. In the end I got Chinese knock-off Porsche center caps off fleabay in dark grey with both the grey emblem and a set of dark grey with the colored emblem. They were $15 a set and have held up very well and are a perfect match to the rim color. As for performance it was a significant reduction in ride quality. Steering is much more responsive over the 17" turbo twists and Michelin AS3 tires they replaced, the car also seemed a little lighter and more nimble. $650 for the tires/rims, $75 for the spacers and $60 for the lug bolts.
Suspension was also a screamin deal on craigslist. Theyre Bilstein sport struts and Eibach lowering springs that came off a Boxster with 60k miles on it. $450 for the set and another $450 for a pro install and alignment. It only lowered the car about 1" but changed the character of the car considerably. Both from the outside and inside its a more drastic change than I imagined it would be. Inner fender lips were rolled to avoid rubbing and the required "outer limit" 2 degree negative camber will reduce the life of my rear tires by a further 50%, and thats beyond the Boxsters' already big appetite for rear tires. The suspension expert stated running asymmetric tires will help, and that tire manufactures have come a long ways in improving asymmetric technology, but I can still expect a significant loss of rear tire life as a result of a lowered car and the camber required. In my opinion its well worth it. Yes the reduced tire life sucks but from both a cosmetic and performance standpoint I still think its the way Boxsters should ship from the factory. It increases the impression that youre driving a sports car. The improvement over a stock base Boxster is, obviously, reduced body roll but also a smoother ride. Yes rough roads are a little rougher, and overall the car is a stiffer ride, but its also a more fluid ride over the stock suspension and a more solid feel behind the steering wheel.
The seat covers were my very first improvement when I purchased the car. I almost always drive top-down and the covers were added for no other reason but to prevent sweating in the seats, and they work great. I think it was a step down cosmetically over the black leather seats but getting out the car without a sweaty ass is priceless to me. Its been a while but if memory serves I purchased them on line from autoaccessories.com for $200. Expensive but I wanted real sheep skin and as close to the car color as possible.
__________________
02 Seal Grey 5 Speed
|
|
|
|
|
08-26-2015, 12:11 PM
|
#94
|
|
WALDMEISTER
Join Date: Sep 2013
Location: Germany
Posts: 1,362
|
Porsche crest in arm rest...as if it was meant to be there in the first place 
What you need:
Porsche crest
Betalink K1 glue (black) --> rock solid weather proof automotive glue will keep the crest in place for ever
cutter knife
dremel (to get rid of glue residue, to grind and flatten underground a bit)
ball pen (to outline crest shape before cutting)
edding Mattlack-Marker edding 4000 (outline crest in matt black)
__________________
Original Owner | PORSCHE Boxster 2.7L (MY01) | Seal Gray
Last edited by BRAN; 10-28-2017 at 02:58 AM.
|
|
|
|
|
11-15-2015, 07:51 AM
|
#95
|
|
WALDMEISTER
Join Date: Sep 2013
Location: Germany
Posts: 1,362
|
zunsport mesh grilles (kept the chrome trim behind them)...
Grilles are pretty shiny though hard to see in the photos here, IMO a perfect old school "chrome" look
__________________
Original Owner | PORSCHE Boxster 2.7L (MY01) | Seal Gray
Last edited by BRAN; 10-28-2017 at 02:59 AM.
|
|
|
|
|
11-15-2015, 05:09 PM
|
#96
|
|
Registered User
Join Date: Nov 2012
Location: SW Okla
Posts: 1,115
|
Looks good Bran.
I always like seeing what you are doing to your car.
__________________
I think I have a Porsche problem...
|
|
|
|
|
11-17-2015, 01:34 PM
|
#97
|
|
WALDMEISTER
Join Date: Sep 2013
Location: Germany
Posts: 1,362
|
Quote:
Originally Posted by RedTele58
Looks good Bran.
I always like seeing what you are doing to your car. |
Many Thanks
2 more mods in the works...and many more to come
__________________
Original Owner | PORSCHE Boxster 2.7L (MY01) | Seal Gray
|
|
|
|
|
11-30-2015, 11:19 AM
|
#98
|
|
WALDMEISTER
Join Date: Sep 2013
Location: Germany
Posts: 1,362
|
What changed?
Hint: Barely noticeable, a really time consuming mod...didn't use a dremel, but a file
__________________
Original Owner | PORSCHE Boxster 2.7L (MY01) | Seal Gray
|
|
|
|
|
12-01-2015, 10:08 AM
|
#99
|
|
WALDMEISTER
Join Date: Sep 2013
Location: Germany
Posts: 1,362
|
...not easy, I know
:dance:
__________________
Original Owner | PORSCHE Boxster 2.7L (MY01) | Seal Gray
Last edited by BRAN; 05-09-2016 at 10:32 AM.
|
|
|
|
|
12-05-2015, 10:37 AM
|
#100
|
|
WALDMEISTER
Join Date: Sep 2013
Location: Germany
Posts: 1,362
|
Happy belated 15th B-day (late November actually)
...50.000km...you made it finally, you're a honey!!
__________________
Original Owner | PORSCHE Boxster 2.7L (MY01) | Seal Gray
Last edited by BRAN; 12-05-2015 at 10:47 AM.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -8. The time now is 11:36 AM.
| |
"GRAY"
Chesil Speedster
Boxter S
No name
Name my car - no
2002 Porsche Boxter S
2001 Porsche Boxster S
1999 Porsche Boxster
1999 Porsche Boxster
1999 Porsche Boxster
1999 Porsche Boxster
2000 Porsche Boxster
1999 Porsche 996 C4
1972 Porsche 914
1984 Porsche 928S
1984 Porsche 928S
1985 BMW 635 Csi
Linear Mode
