18" cup3´s with spacers
 

Here´s pics before and after installation. Wheels are original cup3´s and spacers are made by FK (front 5mm, rear 10,5mm). I really like the new look... much better than before. I also changed 8mm longer nuts for rear wheels´.

before:
https://lh6.googleusercontent.com/-G...2/IMG_1116.JPG

after:
https://lh3.googleusercontent.com/-4...2/IMG_1118.JPG

before:
https://lh6.googleusercontent.com/-q...0/IMG_1120.JPG

after:
https://lh3.googleusercontent.com/-G...0/IMG_1123.JPG

https://lh3.googleusercontent.com/-r...0/IMG_1138.JPG

Perfection! and excellent job on the paint (like new).

Now be ready to be told off by some members here.... apparently wheels spacers goes along very well with "luck", don't ask! And you wheel bearings will fail, and your IMS will be the next thing, and then kaboum... all the rest will blow-up.

Welcome to 986forum ;)

thx. the paint really is in a quite good condition. there are couple of pics;

https://lh3.googleusercontent.com/-f...2/IMG_0570.JPG
https://lh6.googleusercontent.com/-7...2/IMG_0582.JPG

the car is now in garage, waiting for the next summer. we still have minus celsius grades here in Finland.