Here are a few more photos:
The BSA wheels have a nice lip in the rear. The photo shows the chrome lug bolts installed. I got them for $75 from Vertex Auto - a set of 20. They're very good quality. I'll put up a separate post about them sometime as I took lots of photos.
I installed a Polk 5.25" driver in the stock door location. This required a little Dremel modification of the plastic enclosure, but it fit well. I've got a Mark Levinson 3.5" and the matching Polk tweeter to install in the dash yet.
The Dzus fastener holds the CF hood down tight. When the hood is made the materials shrink and create a less than perfect fit with the finished product. Just about all of the CF hoods I've seen on Boxsters and 996's bulge in the middle as a result. This was my fix - custom brackets underneath and a Dzus 1/4 turn fastener on each side of the hood. My hood lies nice and flat now.
Kirk
Threaded Mode
