Not Passing Emission Codes..1128,1130,1137
 

Hello,..Like so many of us, I got the usual emission codes,..1128,1130,1137..also got the 4460 code

my MAF number's at idle and full temp of 180,..is MAF=bouncing between 10-11 kg/h
MAF sensor = 1.23 . I dont understand these number's, are they close to spec. ?
my Ign timing said 2.3 MS and my cam deviation is bad at bank 1 = 9.28 2. = 4.19..was hoping to get thru emissions not sure thats possible with my Cam deviation Number's...is it ?

PS with engine running, I did spray carb cleaner around the whole engine, intake boot's,Injector's, base of intake tube's or runners Etc NO change in Idle.

Thank's Frank