T fitting for oil temp and pressure gauges

[truegearhead]

I know his has been covered, I can find threads were the fitting is referred to but I can’t find a part number for the fitting. (T fitting to install oil pressure and oil temperature sensors). Can anyone help me out?

Happy Friday

[Medsurf]

I just installed both an oil pressure and temperature gauge and using a bung on the driver side block for the temp sender after finding this on here.

http://986forum.com/forums/boxster-racing-forum/33994-oil-temp-sensor.html

[truegearhead]

Originally Posted by Medsurf

I just installed both an oil pressure and temperature gauge and using a bung on the driver side block for the temp sender after finding this on here.

http://986forum.com/forums/boxster-racing-forum/33994-oil-temp-sensor.html

Ok what am I missing? I see you installed a temp sensor, how’d you install both?

[The Radium King]

there are bungs on both heads. there is the one on the front pssgr side where the oil pressure switch currently sits - replace that with a vdo oil pressure sender. there is another on the rear drvr side (under the intake) where you can mount the oil temp sender.

[truegearhead]

Originally Posted by The Radium King

there are bungs on both heads. there is the one on the front pssgr side where the oil pressure switch currently sits - replace that with a vdo oil pressure sender. there is another on the rear drvr side (under the intake) where you can mount the oil temp sender.

Ah so that’s what I’m missing. Thanks!

[NewArt]

Replace the existing sender with the 996 sender to have both the pressure and the idiot light from the same sender. Use the other bung for vdo temperature sender.