Quote:
Originally Posted by Quadcammer
same thing side to side. Its 4 bolts and an electrical connector. my bolts were male torx so you'd need a female torx socket, but other than that its a piece of cake.
|
Also, disconnect the battery before disconnecting the under seat connection, as you will throw an airbag light that can only be cleared with a Durametric or factory computer.
Unhooking the connector is a little tricky as well, as it has a locking device - but there is a fairly good YouTube video to show you how.
Additionally, once the seats are out remember the rails are spring loaded, so try to stay away from the fore/aft release lever. If you bump it, the rails will misalign. They can be realigned (with some force), so it’s not the end of the world.
Sent from my iPad using Tapatalk
Blue Box
Threaded Mode
