Driver Window not Dropping

[djomlas]

i had similar problem, it ended up being the regulator only. cost me $200 even with installation. ther was no way i was gonn do that myself in 30 degree chicago weather at that time

[clb0099]

no movement with the window. I can not move it all with the switch or by hand

[clb0099]

just so i explain it right the window right now is closed. The top of the window will not tuck under the rubber gasket on the hard top. When i press the switch nothing happens and if i tried to push window down manually nothing happened. It won't move at all. My question is if i am going to change the regulator or motor how do i get the window down to access the bolts i need to get to ? I am figuring it is my regulator that is burnt out. At this point I will wait for more info. I am trying to be as clear as possible . Thank you for your help

[clb0099]

Can someone tell where is the relay for the power windows. Also is there more then one relay for both windows. What I mean is there seperate relay for left/side windows. Pictures would be great

[Tool Pants]

There is no relay(s) for the power windows.

[clb0099]

So the only way to see what is dead would be to take it apart. Does anyone know if there is any other way to test if the motor is still good. Thank you for the answer about the window relay. Also how do i get the window down to access the bolts on the clamps holding the glass. Is there some kind of trick. I have read the window project but do not see anything about if your window is stuck in the up position.

[clb0099]

Well i went ahead and bought the regulator / motor installed in and nothing works still. Seems like no power going to the window. I am so confused since i check the fuse ad people are saying there is no relay for the windows. My passenger window is working fine. Anyone have an idea what it could be? I checked the plug in the box under the seat it seems to b plugged in . There is only one plug i can feel . Please help me out alittle.