05-19-2017, 04:39 PM
|
#1
|
|
Registered User
Join Date: Oct 2016
Location: Orangeville, Ontario, Canada
Posts: 229
|
Power clamshell issues
Last edited by dulmer; 07-26-2018 at 02:40 PM.
|
|
|
|
05-20-2017, 01:04 AM
|
#2
|
|
Registered User
Join Date: May 2015
Location: Sydney, Australia
Posts: 335
|
So you've changed over the transmissions, but not updated any of the wiring or swapped to the newer relay, right?
You know in the old system there's 2 inputs, one from the lever at the rear, and one from the microswitch near the top mounting/pivot point on the drivers side. Did you maybe have the top open or in the service position when you tried closing it so it wasn't hitting this switch?
|
|
|
|
|
05-20-2017, 02:46 AM
|
#3
|
|
Registered User
Join Date: Oct 2016
Location: Orangeville, Ontario, Canada
Posts: 229
|
Power clamshell issues
Quote:
Originally Posted by oldskool73
So you've changed over the transmissions, but not updated any of the wiring or swapped to the newer relay, right?
You know in the old system there's 2 inputs, one from the lever at the rear, and one from the microswitch near the top mounting/pivot point on the drivers side. Did you maybe have the top open or in the service position when you tried closing it so it wasn't hitting this switch?
|
Sent from my iPad using Tapatalk
Last edited by dulmer; 07-26-2018 at 02:42 PM.
|
|
|
|
|
05-20-2017, 11:23 AM
|
#4
|
|
Registered User
Join Date: Oct 2016
Location: Orangeville, Ontario, Canada
Posts: 229
|
Power clamshell issues
Sent from my iPad using Tapatalk
Last edited by dulmer; 07-26-2018 at 02:42 PM.
|
|
|
|
|
05-20-2017, 04:40 PM
|
#5
|
|
Registered User
Join Date: May 2015
Location: Sydney, Australia
Posts: 335
|
Just noticed on your welcome post that you also picked up an updated glass roof. Did you also have that fitted currently? If so, the new roofs don't have the arm that presses the microswitch mentioned above, which will be the issue. If you have the new roof on you need to do the wiring and relay updates, as well.... Or just rip it all out and go manual as you are planning I guess.
|
|
|
|
|
05-20-2017, 04:47 PM
|
#6
|
|
Registered User
Join Date: Oct 2016
Location: Orangeville, Ontario, Canada
Posts: 229
|
Power clamshell issues
Quote:
Originally Posted by oldskool73
Just noticed on your welcome post that you also picked up an updated glass roof. Did you also have that fitted currently? If so, the new roofs don't have the arm that presses the microswitch mentioned above, which will be the issue. If you have the new roof on you need to do the wiring and relay updates, as well.... Or just rip it all out and go manual as you are planning I guess.
|
Sent from my iPad using Tapatalk
Last edited by dulmer; 07-26-2018 at 02:43 PM.
|
|
|
|
|
05-20-2017, 05:40 PM
|
#7
|
|
Registered User
Join Date: Oct 2016
Location: Orangeville, Ontario, Canada
Posts: 229
|
Power clamshell issues
My only concern with manual operation of the clamshell is that it doesn't sit flush when the roof is down, and rigging up a hood latch might be a bit of a pain. I think I'll try a Quick Latch, mounted at the centre of the clamshell on the trailing edge. I should be able to use the roof motor bracket to locate the pin.  
Sent from my iPad using Tapatalk
Last edited by dulmer; 05-20-2017 at 06:07 PM.
|
|
|
|
|
05-23-2017, 07:51 AM
|
#8
|
|
Registered User
Join Date: May 2014
Location: S.California
Posts: 2,029
|
|
|
|
|
|
05-23-2017, 03:04 PM
|
#9
|
|
Registered User
Join Date: Oct 2016
Location: Orangeville, Ontario, Canada
Posts: 229
|
Quote:
Originally Posted by Gelbster
|
I went with the 1" aluminum version. We'll see how it works, and I may change it up for a locking one in the future.
Sent from my iPad using Tapatalk
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 11:15 PM.
| |
1997 Porsche Boxster
Linear Mode
