vacuum line question

[madmodz]

[QUOTE=Rok986;509173]

Originally Posted by 78F350

Starting from the vacuum reservoir: Connect to electric change-over valve "J", then to the flapper valve. The Y "I" in the diagram will only be present if you have a Tiptronic.



"E" is located behind the Alternator.



Thanks! I will take another look. Do I have to remove the alternator to be able to access "E"?

Nope, it connects to the bottom of D

[78F350]

Originally Posted by madmodz

Nope, it connects to the bottom of D

What question is that the answer to?

Do I have to remove the alternator to be able to access "E"?

You can probably reach it from the top if you take the resonance tube off, I'm not sure that would be easier. For me it's easiest to take the alternator out.
Renntech is usually pretty good for this stuff. Check this out for another perspective:
Help Replacing the Electronic Change Over Valve - 986 Series (Boxster, Boxster S) - RennTech.org Community

[Rok986]

Originally Posted by 78F350

What question is that the answer to?



You can probably reach it from the top if you take the resonance tube off, I'm not sure that would be easier. For me it's easiest to take the alternator out.
Renntech is usually pretty good for this stuff. Check this out for another perspective:
Help Replacing the Electronic Change Over Valve - 986 Series (Boxster, Boxster S) - RennTech.org Community

Awesome, thanks for the link! Haven't really gone on Renntech.