ROW Cam sensors

[whitecliffs]

That right Steve there's only one sensor on ROW engines, anyway fixed it replace the solenoid on bank 4 - 6 and now when i manually operate it you can hear a change in engine note

[Reebuck1]

Interesting comments....
I installed a 3.4 996 motor in my 1998 986 and re-flashed the DME with a ROW flash so I could remove most vacuum lines. I noticed when I did it that my Durametic stopped displaying my cam deviation on both banks. Sounds like you have had the same problems.

I have not called Durametric about it yet....I'll let you know what they say!