|
I know how to jumper the seat. I did it today with the reclining back. I need to know which wires move the bottom seat part. Once I have the seat moved I'll be able to get to the bolts then to the connector that came loose.
The motor(s) are 12 volt first have a battery with a full charge. I used my car battery. A set of jumper cables and connect them to the wires
of the motor(s). If the seat goes backwards and you want it to forwards just reverse the cables on the wires
Last edited by irelandmoss; 08-03-2014 at 05:04 PM.
|
Threaded Mode
