Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-25-2010, 11:13 AM   #1
Registered User
 
Join Date: May 2008
Location: Toronto
Posts: 2,656
Just out of curiosity, are you an expat? I was just there in Nov for a family wedding.

Get all-season(this may be a foreign term to people outside of North America) tires with softer sidewall. 17"s will help but I doubt you'll have an easy way to source wheels that will fit the 986.

As an extreme measure you can remove the front & rear swaybars, but I remember one of them (rear??) is a bi*ch to take off.
ekam is offline   Reply With Quote
Old 04-25-2010, 07:16 PM   #2
Registered User
 
Join Date: Feb 2009
Location: Hong Kong
Posts: 16
Hi ekam...I'm originally from Ireland, but have been in HK for 20 years.

I thought 17" wheels were standard on the 986?
__________________
'99 Boxster S (MY '00) Tiptronic
Opposite Lock is offline   Reply With Quote
Old 04-26-2010, 09:25 AM   #3
Registered User
 
Join Date: May 2008
Location: Toronto
Posts: 2,656
Quote:
Originally Posted by Opposite Lock
Hi ekam...I'm originally from Ireland, but have been in HK for 20 years.

I thought 17" wheels were standard on the 986?
I've spent my last 15 years away from HK. I figured you aren't local, as most drivers I've seen in convertibles over there are not!

16"s were standard for our generation Boxsters, 17"s were standard on the S due to the bigger brakes. 17"s off of the 987 Boxsters & Caymans will fit as well.

Last edited by ekam; 04-26-2010 at 09:27 AM.
ekam is offline   Reply With Quote
Old 04-26-2010, 10:01 AM   #4
07 Carrera S Cab
 
Boxtaboy's Avatar
 
Join Date: Nov 2005
Location: New Jersey
Posts: 2,273
Garage
I spent 2 yrs. in HK working for a US firm. Was great fun, and even drove a couple of my friends' cars (getting used to the steering wheel on the right side was not that difficult). They were all coupes though, as it's usually too hot and humid there for a convertible to make much sense.
__________________
Current: 07 Carrera S Cab in Midnight Blue

Previous: 01 Boxster in Arctic Silver, 86 944 in Guards Red
Boxtaboy is offline   Reply With Quote
Old 04-30-2010, 06:02 AM   #5
Registered User
 
Join Date: May 2008
Location: Toronto
Posts: 2,656
To give people an idea...





1.00 USD = 7.76337 HKD
ekam is offline   Reply With Quote
Old 04-30-2010, 09:18 PM   #6
Registered User
 
Join Date: Feb 2009
Location: Hong Kong
Posts: 16
The quoted areas are gross square footage. That includes the stairs, walls, elevators and common areas.

So 1,800 sq ft actually gets you about 1,400 sq ft.

And the prices have probably gone up since the photos were taken.

Back on topic: I took the tire pressure down to 25/30 and there is hardly any difference. I think I'm just going to have to look for another car. It's a shame, but I don't look forward to driving the Boxster any more. And that should never happen.
__________________
'99 Boxster S (MY '00) Tiptronic
Opposite Lock is offline   Reply With Quote
Old 05-03-2010, 07:27 AM   #7
Registered User
 
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
OL, it sounds like you've arrived at a solid conclusion about Porsches. The car is designed with a really tight suspension so it can handle at speed. I don't think they cared much about the daily drivers and potholes and uneven city streets due to the compromises it would require.

My BMW is my DD but the suspension is far stiffer than my older DD, which I still have as a beater, my Lexus LS400.

In my opinion, a Lexus for city commuting is the most comfortable car one can own and it has some status attached to it, which is important in HK.
RandallNeighbour is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page