12-01-2009, 04:31 PM
|
#1
|
|
Registered User
Join Date: Aug 2008
Location: DFW
Posts: 46
|
Inatalled Accu-Sump on race car.
After doing a few track events and looking at the oil pressure I decided that it was something that needed to be fixed. Had my machine guy make an adapter that screws in where the stock filter goes and allows for AN10 lines to be run to a remote filter and accu sump. Since install oil pressure has been steady at 60psi even in long high g corners.
Here are a few pics of the install.
Chris
|
|
|
|
12-01-2009, 05:16 PM
|
#2
|
|
Registered User
Join Date: Sep 2009
Location: The City
Posts: 1,084
|
it looks good very clean and pro... congrats
|
|
|
|
|
12-02-2009, 03:09 AM
|
#3
|
|
Registered User
Join Date: May 2006
Location: North West,UK
Posts: 123
|
Looks great, I am just researching these kits for my car. I assume you have installed some kind of remote filter with this? Some further pics would be appreciated
|
|
|
|
|
12-02-2009, 04:28 AM
|
#4
|
|
Registered User
Join Date: Aug 2008
Location: DFW
Posts: 46
|
yes there is a remote filter mounted in the trunk. The total install you are looking at about 1300 or so. The damn hoses were over $300 to get made. But thats alot cheaper then a new motor from Porsche.
I will take some more pictures and post here shortly.
Chris
|
|
|
|
|
12-02-2009, 05:36 AM
|
#5
|
|
Registered User
Join Date: Nov 2003
Location: Illinois
Posts: 3,033
|
Wow, looks a nice setup. Could you post up some more pics please? Not just of the accu-sump but also the whole car. Thanks!
|
|
|
|
|
12-02-2009, 05:43 AM
|
#6
|
|
Registered User
Join Date: Nov 2008
Location: Champaign, IL
Posts: 355
|
wow, now thats a clean motor. nice job. 
__________________
Lov'n my boxster!
2013 Lexus IS350awd
2007 Toyota FJ Cruiser
2004 Porsche Boxster S
|
|
|
|
|
12-02-2009, 07:21 AM
|
#7
|
|
Registered User
Join Date: Aug 2008
Location: DFW
Posts: 46
|
Thanks guys. That motor was a brand new crate motor from porsche. Made it almost 25 miles before blowing up!!! I guess when Hans installed the head he didnt make sure it fit right. Oops. They cover it under warranty and the new motor seems great.
Thats Hans in Germany not Hans at RUF>
Last edited by amondc; 12-02-2009 at 01:52 PM.
|
|
|
|
|
12-02-2009, 07:54 AM
|
#8
|
|
Registered User
Join Date: Apr 2006
Location: Dallas, Tx
Posts: 730
|
Is this the oil system you were testing during the September DE?
__________________
2003 Boxster - Sold but not forgotten
|
|
|
|
|
12-02-2009, 08:22 AM
|
#9
|
|
Engine Surgeon
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
|
We've been developing a similar system for about 28 months now.. Still not 100% happy with the total kit but have made many enhancements. We are now on Gen II of most of the components and still evaluating.
Chris' adaptor is a nice piece, I wanted to compare one to the arrangement we had but we use -12 hoses and Chris uses -10 so we could not get a direct comparison...
We have accusump set ups in both our Boxster test vehicles as well as my 911 track car.. In time complete kits with every part necessary as well as a step by step installation DVD will be available.
We are building my Boxster test vehicle into a SCCA ITR race car over the winter and more data about the effectiveness of the unit with sticky tires and high G forces will be available after we get a few events under our belts.
|
|
|
|
|
12-02-2009, 10:02 AM
|
#10
|
|
Registered User
Join Date: May 2006
Location: North West,UK
Posts: 123
|
Jake, ETA on your kit?
|
|
|
|
|
12-02-2009, 11:39 AM
|
#11
|
|
Engine Surgeon
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
|
No ETA at the present. Until I gather more on-track data and work out the details of the best valving, plumbing and etc I do not feel confident selling an arrangement. The detailed changes we have made so far have made a difference in effectiveness and I want top optimize this kit as much as possible before it sells.
Otherwise I am just like all the other "pimps" out there.
|
|
|
|
|
12-02-2009, 01:41 PM
|
#12
|
|
Registered User
Join Date: Mar 2008
Location: Dallas, TX
Posts: 288
|
Quote:
|
Originally Posted by amondc
Thanks guys. That motor was a brand new crate motor from porsche. Made it almost 25 miles before blowing up!!! I guess when Hans installed the head he didnt make sure it fit right. Oops. They cover it under warranty and the new motor seems great.
|
Don't scare me like that, Hans is putting in a new motor for me as we speak but mine is a 200 (not a typo) mile 3.2 ebay special so I am flying without a warranty, although I do have an extended warranty, I doubt they will cover another engine.
__________________
2001 Boxster S
RUF front bumper, Techart side skirts, Gemballa rear bumper, PSS9s, Cargraphic 18" racing wheels, RUF exhaust, GT3 seats
|
|
|
|
|
12-02-2009, 01:51 PM
|
#13
|
|
Registered User
Join Date: Aug 2008
Location: DFW
Posts: 46
|
Quote:
|
Originally Posted by timothy
Is this the oil system you were testing during the September DE?
|
Yes except we put proper hoses on it now and they don't blow off.. 
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 11:13 PM.
| |
Linear Mode
