Help! How Do I....
 

How do I make the speedster humps fit in the rear trunk? Anyone have an idea? I can't seem to get these things to fit together.

If you have pictures that would be great.

Thanks for the help.

James

I had a set of these before... I know this might not be completely helpful in the description, but you basically just stack them on top of each other, but.... well I'll see if I can dig up a picture... maybe someone else here can do a better job of describing it... haha

They fit in an empty trunk. I did it once years ago when I took the car to the dealer and once I was there it started to rain. Usually when it rains I would have just put one on the passenger floorboard and the other on the passenger seat, as I have too much stuff in the rear trunk.

I had emptied the trunk before I went to the dealer, so I put them in the trunk. Took me a while flipping and moving them around. Did not think to take a picture.

James,

If you figure this out or if someone else knows please post up !

This is the primary reason I have only used mine once :mad:

Nick

This will be my weekend mission. I will post pictures when I finally figure out the exactly position they must sit.

They definitely fit. When Ellen gets home with the car, I'll take a picture. That's where we store ours all the time.

Thanks Grizz that would be a big help.

Nick sell me them and you'd never have to worry about it again. :D

This will be my weekend mission. I will post pictures when I finally figure out the exactly position they must sit.


Dude forget pics of them in the trunk,lets see pics on your ride with all the other work you got done. :cheers:

I did it once last summer. I must have gotten lucky as it only took 2-3 tries before I figured it out. It was a tight fit though and I remember that the trunk lid had just enough room to shut and latch. I sure didn't want to have to slam the lid to get it to latch.

I wonder if I have a different style or something, because mine go right in.

The first one goes in like this with the wraparound part pointing to the driver's side taillight...

http://i84.photobucket.com/albums/k2...1/DSC00906.jpg

The second one goes on top of it like this, with the wraparound part pointing to the passenger side taillight...

http://i84.photobucket.com/albums/k2...1/DSC00907.jpg

In the bags, they look like this...

http://i84.photobucket.com/albums/k2...1/DSC00909.jpg

EURKEA!!!! They fit. Thanks Grizz, always coming through in the clutch!

Griz, you rock !

( Sorry Blink )

Nick

Hey Griz,
are they OEM humps? Mine are and I can't seem to get them to fit in my 02 like that. I can get both in the front trunk though. It's a very tight squeeze but i can do it. Normally I just put one it the front and one in the back.

No, mine aren't factory, they're after-market.

I have the OEM humps and they fit just like the picture Grizz posted.

Really?? Man I thought i tried it every way possible. Have to try it again this year when i take her out again. Thanks for the info.