Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-08-2007, 07:35 AM   #8
Registered User
 
Join Date: Dec 2007
Location: melbourne
Posts: 6
it's best to have the flywheel change due to it being a duel mass flywheel, they have a rubber bushing between where the clutch engages on the flywheel and the mount point to absorb the jolt of the clutch engaging, the rubber bushing tears and wears out and makes it a harsh clutch, have your rear main seal changed while your there anyway due to the whole thing has to come out again if it leaks 10,000 K's from now, same with your counter shaft seal, also just a little inside tip, have a 997 rear main seal installed, it fits the same but has a little lip on the seal stopping it leaking in future, fixes a commen problem on 986 and 996.
should only take 7 hours max, you'll need a flywheel, 9 flywheel bolts, rear main seal, counter shaft seal, pressure plate, cluch plate. AND GET SOMEONE WHO ONLY WORKS ON PORSCHES, its easy to stuff up a counter shaft seal. i don't see why you would gear box fluid as RandallNeighbour said. maybe a litre of oil due to the oil has to be drained to do a counter shaft seal
porsche804 is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page