![]() |
Amsoil in 986?? Anyone using it?
A friend of mine was a Ferrari mechanic and talked me into using this on my shovelhead (40wt racing oil). Says it extends the life of the engine and was amazed at how clean the engines were after using Amsoil.
I have had great success in my old shovel, runs cooler and always comes out clean. Wondering if anyone has used it on a boxster. thanks -c |
I have not used it in my 986s, but I did use to always use it for my old MBZ 400e that was lightly modified, and yes I did notice a big difference when I switched to it, but my car back then was not on synthetic oil, that was the first taste to it. I don't know if it is any better than mobil1...definately much better than the non synthetic oil I was running
|
amsoil
I have on my 2000 S and I notice a big diff in power and coolant temp very little noise on cold start I also have a cayenne and that as royal purple is ok but not as noticeable as the amsoil in the boxster
|
|
Amsoil makes a fine oil.
1-I assume you are NOT talking about using the straight weight 40 oil in the Box. That is a no-no. 2-Amsoil makes two versions of its oil. One is a G3 syn and the other, a G4. If you buy, makes sure you buy the g4 and in the appropriate weight. For my money, Red Line is the best out there. 5W-40 is the deal. Good luck. |
Hi,
C'mon guys - a Power Boost from changing brands of Oil??? PUT DOWN THE METH PIPE! JUST SAY NO! Even if that were true (which it isn't), show me a Dyno sensitive enough to detect the change... Come to think of it, I have this pair of Chinos, and my car always has more power if I wear them... ;) Happy Motoring!... Jim'99 |
I have to say that I have NEVER experienced this "my car runs smoother on oil X".
I have heard this said many times but I have never heard HOW that could happen. Anyone know how an oil switcing from one quality oil to another could do this? |
Hi,
It's an extension of the philosophy Cogito, ergo sum - I think it is... therefore it is... Or in other words - Placebo Effect - a very powerful thing... Happy Motoring!... Jim'99 |
True, but when driving on the street, isn't your perception the only thing that matters?
Everything is relative to the observer. |
Quote:
Well, not really. Say the copy is writing the ticket but you don't quite perceive it that way and you drive off. I think the cop would trump YOUR reality. :D |
Quote:
What I was getting at in my post is that since the street is not a track environment, any actual performance increase is trumped by a perceived performance increase since there is no method of actual measurement. Driving on the street is all enjoyment factor. Put differently, since there is no win or lose in day to day driving, an increase in perceived performance with no acual increase in performance is better than an actual increase in performance that is not at all preceived. |
Dr. Kill, that's some deep stuff, man! I had to re-read it a few times. :)
|
I can't understand why some owners who are afraid to drive their cars above 4000 rpms after they are warmed up would use an oil that is not approved by Porsche.
http://www.wrightune.co.uk/downloads/approved_oils.pdf |
Quote:
IF you are referring to me, I am not afraid to drive ANY car over 4000 RPM and have never said so. I simply said you are fooling yourself if you think that living at the red line will do your engine "GOOD". This defies the laws of physics. Specific to Porsche and oil, I consider the source and act accordingly. However, you are free to use whatever oil you want, that is why this is such a great country! :) |
Quote:
PS-cross thread pot shots are considered bad form. Take it off line if you have a beef with me. |
Quote:
|
Maybe there's something to it after all.
Obviously this is from the advertiser's site so it's a lot of slick marketing, but then again I know basketball players that always wear the same color socks on game day and swear by it.
Synthetic 20W-50 Racing Oil Keeping friction low helps hold down engine wear rates and temperature. Which helps engines last longer. Reducing friction also conserves fuel. But the real benefit of superior friction reduction in a race engine is greater speed. Speed, after all, wins races. Some of the energy produced by the combustion of the fuel-air mixture is consumed by friction along the way from the combustion chamber to the flywheel where torque and horsepower are measured. The more energy that escapes consumption, the more torque and horsepower there is available for moving the car. |
Quote:
|
Oil viscosity is a complex subject.
In theory, you want just enough oil film and volume to avoid metal to metal contact and to cool the engine. Too much viscosity and you waste fuel and lose a bit of power. Too little and you have premature wear or worse. The 20W-50 MIGHT make sense in some applications but certainly not for Boxster street use. |
Quote:
Hi, Don't know how you figure that. Aside from stating the obvious, there isn't a whole lot of information there - it's just Hype. Oil reduces Friction - there's a revelation - Stop the Presses, Film at 11... A Racing Engine is an entirely different animal - purposely designed to much Looser tolerances. A Race Engine develops more, not less Friction. And remember, we're talking about a comparison of one Oil to another, not whether Oils aren't lubricants. There's very little friction in the Oil Bearing internals of a car - the Crankshaft, Big-Ends, Small-Ends, Pistons, even the Cam lobes have no metal-to-metal contact, at least in theory. All these components Float on a film of Oil. Again, any quality Oil with the same viscosity will not create any more Power than any other. You can think so if you wish, but it's Myth. A lot of people say that a new Oil makes the Car Smoother or Faster, but their comparison is to another Oil which is used, Broken Down and Dirty, not when that other Oil was new... Happy Motoring!... Jim'99 |
All times are GMT -8. The time now is 06:43 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website