986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Performance and Technical Chat (http://986forum.com/forums/forumdisplay.php?f=11)
-   -   Installing OBC stalk/ enabling OBC in 02 S (http://986forum.com/forums/showthread.php?t=10046)

Cloudsurfer 03-14-2007 06:36 AM

Installing OBC stalk/ enabling OBC in 02 S
 
I have an 02 S that was ordered without the On Board Computer. My previous understanding was that you could simply have the dealer turn on the OBV via the PST2 and it would then show outside temperature readout. I spoke to my dealer yesterday, who told me that worked on cars up to 01, but that the 02 and newer you also need to install the stalk.

I primarily just want the outside temp readout, but if I can have the whole OBC I suppose it is useful to have. Can anyone verify if this info is correct? If anything, I would think it would be up to 02 was one process, and 03 and up would be different, not up to 01 and 02 and newer being different.

Also, if I choose (or have to) install the stalk, how much of a PITA is this and what is the estimated cost?

Thanks

Patrick

Tool Pants 03-14-2007 08:22 AM

This worked on 1997-2000. The design of the cluster changed in 2001 and you do not see any of the OBC displays after it is turned on unless you install a switch or stalk.

If you did the retrofit on a 2002 then the OBC displays will look like the displays on a 2001 with the OBC option.

How to do it is on renntech and we made a DVD of several installs.

Cloudsurfer 03-14-2007 07:23 PM

Well looks like I"ll be installing the stalk then ;)

Thanks

Patrick

Wintermute 03-19-2007 08:01 PM

You know, I've wanted to do this but where does one get the stalk?

Thumper 03-19-2007 09:00 PM

Talk to Jeff Clark at Sunset Porsche in Oregon. Dealer cost + 15%. Jeff will know exactly everything you will need.

http://www.****************************************************.com/

Cloudsurfer 03-21-2007 10:36 AM

For those who want to do this, here are the required parts as per my dicussion with Jeff:

996 613 219 10 EWC 4-stalk switch
999 650 513 40 plug
(4) 000 979 079 wire ends
(2) 993 552 573 01 01C plug

Total for the above is $175 plus shipping.

Once the new stalk switch is installed, you must enable the functionality via the PST2 and all will work.

Hope this helps

Patrick

Cloudsurfer 03-21-2007 03:17 PM

Found some further interesting reading:


http://www.brackenrig.net/OBC_Hack.htm

Tool Pants 03-21-2007 03:24 PM

You need 5 not 4 of the wires.

You do not need 993 parts.

Cloudsurfer 03-21-2007 08:37 PM

Thanks for the update, I was simply posting what I was told I needed from Sunset.

Patrick


All times are GMT -8. The time now is 05:34 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website