986 Forum - The Community for Porsche Boxster & Cayman Owners
Page 3 of 3 1 2 3
Show 40 post(s) from this thread on one page

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   DIY Project Guides (http://986forum.com/forums/forumdisplay.php?f=50)
-   -   coolant flush...step by step with pics (http://986forum.com/forums/showthread.php?t=9195)

djomlas 07-16-2007 10:12 AM
Quote:
Originally Posted by CJ_Boxster
If the rear of the car is on jackstands, would there be alot of left over old fluid stuck in the front radiators that wouldnt have poured out?
once i drained a lot of it out, i just rolled car down on flat ground, and some more came out. its not that low so u can still tighten the bolt once on the ground.

Paul 08-19-2007 09:44 AM
Since we have a well we use a water treatment system that includes an iron and sulfur filter, a softner, and a reverse osmosis system (for drinking water only).

Is reverse osmosis produced water clean enough for our cars?

CJ_Boxster 01-28-2008 11:41 AM
Where are all the bleeder valves located for the coolant?


All times are GMT -8. The time now is 01:59 AM.
Page 3 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website