Wiring offroad spot and flood lights
 

Hello!
I’d like to install spot and flood lights to the top of a recently purchased roof rack on my 2001 986.
I’d like to control them with a switch replacing one of the blank ones in the center console.
How can i go about wiring this?
Thanks!

Did your lights come with a wiring kit? I have found that the kits that come with a switch and relay are the best way to go.

https://live.staticflickr.com/65535/...4d9dc5e3_b.jpg

https://live.staticflickr.com/65535/...93321334_b.jpg

Otherwise, the simplest way is to run a wire from the 'phone option connector' under the center console for +12v to your switch, then on to the lights. See: http://986forum.com/forums/boxster-general-discussions/54064-what-does-plug-under-dash-go.html

Thank you! That phone connector is really cool.

I’m still researching which lights to get, based on if I can use a center console switch, included basic toggle switch, or some bluetooth panel.

I’m also new to car wiring.

Thank you!
That phone connector seems perfect.
I’m still researching which lights to get, depending on if i can use a center console switch, kit toggle switch, or a bluetooth panel.