DIY: Opening the Top Manually
Put together a little DIY guide on how to raise the convertible top manually in case something breaks and you are stuck out in the elements.
https://youtu.be/8l6tD5n3keE |
Push Rod for Convertible Top Transmission Pivot
The link with the red socket disintegrated but worse, the ball it attaches to came off. It is held onto the bracket with a nut and I have tried every position with the top and I cannot get my hand in there to even start the piece. Has anyone done this that can point me in the right direction as how to access this? a tip, if you are replacing the rod, don't adjust the cup on the threaded end, use the nut to adjust the length because mine broke after 1/4 turn. luckily, I now find eBay has just the socket ends. thanks in advance |
All times are GMT -8. The time now is 02:41 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website