986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   DIY Project Guides (http://986forum.com/forums/forumdisplay.php?f=50)
-   -   Removing the liner from a top (http://986forum.com/forums/showthread.php?t=71801)

78F350 04-17-2018 02:03 PM

Removing the liner from a top
 
2000 - 2004 986s have a liner for the soft top that was not included in the earlier models. One of my cars (2001) had broken plastic at the front edge of the liner. The previous owner had glued it back together enough to hold it, but it was an ugly mess. One day I tried to clean it up and repair it ...a total failure. In the process, I found that it was easy to remove the liner. It came out clean and complete, leaving the top like the earlier models; clean lines and looking complete, without the liner.

Watch the video to see how. In summary: Pull it off the front, slide the middle parts off to the side.

<iframe width="560" height="315" src="https://www.youtube.com/embed/Mck85toZVIU?rel=0" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

SoloPierre 04-17-2018 05:46 PM

Cool video. I had a 2000, and it did not have a liner. I believe the liner started in 2001.


All times are GMT -8. The time now is 12:18 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website