986 Forum - The Community for Porsche Boxster & Cayman Owners

- DIY Project Guides (http://986forum.com/forums/forumdisplay.php?f=50)

- - Camshafts timing alignment (http://986forum.com/forums/showthread.php?t=64961)

Camshafts timing alignment

Hello mates
I need to know how to align camshafts after engine rebuild
I am new

I adjust bank 1 camshafts the notche of the intake is facing outward the crankshaft than i rotate engine 360• until it is at TDC then i adjust bank 2 camshafts and install
Is that right?

Thanks in advance

Sent from my iPhone using Tapatalk

[QUOTE=porscheag_101;522420]Hello mates
I need to know how to align camshafts after engine rebuild
I am new

I adjust bank 1 camshafts the notche of the intake is facing outward the crankshaft than i rotate engine 360• until it is at TDC then i adjust bank 2 camshafts and install
Is that right?"

And when you have done the procedure correctly, rotate the engine about 20 times by the c/s bolt. Align the timing marks on the crankshaft pulley precisely ,then post photos of the camshaft notch positions.
This is not a beer+get 'er done job !
Read Ahsai's thread?
blown engine - Rennlist Discussion Forums