986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   DIY Project Guides (http://986forum.com/forums/forumdisplay.php?f=50)
-   -   How to: Replace ignition coil tubes and seals (with video) (http://986forum.com/forums/showthread.php?t=62335)

neil_b 07-12-2016 12:14 PM

How to: Replace ignition coil tubes and seals (with video)
 
Eagle eyed viewers may have noticed the oil leak when I replaced my spark plugs and ignition coils a few episodes ago. This is because the rubber o-rings that seal the coil tubes fail over time and allow oil to pass through.

Here's my step by step video guide to removing the tubes and replacing the seals:
https://youtu.be/B0y3htZBGxc

http://986forum.com/forums/uploads02...1468354333.jpg

Car used Porsche Boxster S 2001 986

7” bolt – part no. 333 from B&Q (UK)
Coil tubes - (996 105 325 52)
Coil sleeve O-ring (rear) - (999.707.343.40)
Coil sleeve O-rings (front) - (999.707.215)


All times are GMT -8. The time now is 01:31 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website