|
Hi all, newbie on this board and have to say thanks for this thread! I used the info in it today to install a cheapo ebay keyless entry and alarm in my base 97 in under an hour. So far have the doors unlocking/locking and the lights flashing working fine, but wondering if someone could help me with a few other bits...
1. My kit came with a siren and a wire to run to it, but it's a bit big to fit under the seat so I was wondering if I could instead use it to get the horn to sound? Any idea if this would be possible by splicing into a wire in the bundle, and if so which one?
2. Any idea if there's a wire I can splice to get a 'key on' signal, or might I have to take this from the fuse box?
3. There doesn't seem to be a combined 'door open' signal. I currently have it hooked up to just the drivers door, any idea how I could go about combining the separate door open signals into one 'either door is open' signal? (I'm guessing some kind of relay, but a bit out of my depth...?)
Thanks in advance for any advice.
|
Hybrid Mode
