Ball bearing short shifter !

[PaulE]

Originally Posted by WillH

Will these work with the eBay shifter?

They should since Ben's shifter is a modified eBay knockoff of the B&M short shifter. But if you're going to the trouble of taking out your console and disassembling your shifter, why not also go for the bolt action ball bearing smoothness of Ben's shifter?

[WillH]

Originally Posted by PaulE

They should since Ben's shifter is a modified eBay knockoff of the B&M short shifter. But if you're going to the trouble of taking out your console and disassembling your shifter, why not also go for the bolt action ball bearing smoothness of Ben's shifter?

I originally wanted one of his but he was unable to provide one at the time. I went with the Ebay one instead. A little less side to side slop from my eBay shifter would make me happy and if it fits...

[Ben006]

Hi !

Yes it will fist almost any short shifter, and soon even the stock shifter with the addition of a small bushing.

They are almost ready ! I need to pack them and send them out to Uniwerks !

I ran into a "problem" though...

I thought I could machine the shouldered bolts cleanly, but it's very hard to make something that works great, looks clean, and that I can make 200 of without having to quit my job

It's no big deal though, the only difference is that a 10mm hole needs to be drilled to make room for the threaded part of the bolt.
Here it is, cut bolt :

Normal bolt :


Ben