AutoTop DIY

[jpc763]

Originally Posted by JayG

they are just regular 1/4" push on terminals
Gardner Bender 16-14 AWG 0.250 in. Disconnect F TAB (75-Pack)-75-143F - The Home Depot
I used an insulated version
Gardner Bender 1/4 in. Blue Fully Insulated Wire Disconnects (15-Pack)-15-153F - The Home Depot

Thanks! I ordered the components and will go to HD to get the connectors! Can't wait to get this project rolling!

John

[JayG]

Originally Posted by jpc763

Thanks! I ordered the components and will go to HD to get the connectors! Can't wait to get this project rolling!

John

Make sure you get the correct ones for the wire gauge you are using.
IIRC, I used red ones. The package tells you what gauge wire will fit

[jpc763]

Originally Posted by JayG

Make sure you get the correct ones for the wire gauge you are using.
IIRC, I used red ones. The package tells you what gauge wire will fit

What gauge wire should I be using?

John

[JayG]

Originally Posted by jpc763

What gauge wire should I be using?

John

I used 16 gauge, so I guess I used blue terminals