I will definitely look into a straight mini install as you have done. Do you find the SIM card model useful or do you hotspot with your mobile phone? I guess it is tricky to access once imbedded.....but does look clean. Can you attache gps modules before it goes in? The app radio face is a bit messy for my taste.

The current app radios are double din are touted to work all applications just the mini would.....never tried one though....using a mini right now!

Only the mini with 4g capabilities will have a gps in it. I don't know of a way to add a GPS otherwise. The 'sum card model' is the 4g one, and in my view, it's absolutely necessary... Unless you are willing to tether from an iphone every time.

You definitely want to get the mini with the GPS/LTE chip installed. If you buy used, it won't be that much more, if you buy new, it is an extra $128 I believe. You can buy an external GPS but cost wise, it is about the same as getting it built in and then you would have another device that needs to be charged.

Amazon.com: Dual Electronics XGPS150A Universal Bluetooth GPS Receiver for Portable Devices: Electronics

The other advantage of the mini over APP Radio is screen size and of course customization. I have my home screen set to be fairly clean with only the apps that I use most in the tray. I swipe to get to the other apps that aren't as frequently used. You also aren't limited to the apps that Pioneer supports. The mini is not hard to access, the wings on the horseshoe pop out without much effort. I have the mini set to sync via wifi which it does from the garage. All in all, it is one of those great bang for the buck mods. I bought a used horseshoe so I can go back to stock anytime.

I finally got around to getting my GoPoint BT1. Here are a couple of screenshots from Dash Command:

http://986forum.com/forums/uploads01...1397923627.jpg


http://986forum.com/forums/uploads01...1397923639.jpg

For those who are interested in this mod and don't want to modify their horseshoe, here is one on eBay that is reasonably priced:
2000 00 Porsche Boxster 986 Black Upper Center Console Trim 98655213106 51 067 | eBay

I bought a used one and modified it and still have my original if I were to ever want to go back.

I am doing something similar with the Parrot Asteroid Smart. it runs Android and there are a few OBDII apps on the Asteroid market, more if you want to side load from the Android market.
I got a very cheap Bluetooth dongle connected to the Parrot no problem

I'm using torque Pro at the moment.

http://986forum.com/forums/uploads01...1398732321.jpg
http://986forum.com/forums/uploads01...1398732342.jpg
http://986forum.com/forums/uploads01...1398732362.gif
http://986forum.com/forums/uploads01...1398732378.gif

That looks great! :cheers:

Thanks for your thoughts! Did anyone devise a removal system so that you can take the tablet with you? How are all properly securing the tablet in the dash?

From what I can see quickly: It looks like one has to hollow out the upper din rack leading edges to match the iPads rear housing and then make certain adjustments to the horse shoe for clearance; pad up the inside of the horseshoe; snap on horseshoe side covers to retain the iPad. Looks tricky to shape just right; is just the horseshoe that gets dremeled?

-What are the adjustments to the horseshoe and how did were they made to look this good!
- Are you powering the iPad directly from the Becker?
-What audio out cable is needed for the Becker?
-Is there any need to retain a USB input....What does the power cable configuration look like??
-What is the best horseshoe model to use??

My idea will be as follows:

I have a 996 cup holder installed, which "swings" open, so the iPad mini could use that to slide in and out with one push.
Only drawback: The bottom part of the "horseshoe"-frame has to be removed or modified with a "flip up/down" mechanism to maintain kinda oem-looks.

Next problem to solve: A small, lightweight, reliable bluetooth "brand" car amplifier, with usb port, so i don't need a car Audio/Radio. Or maybe go for active bluetooth speakers...

Ideas are there, but is the technology ready? We will see :cheers:

Read through this thread and the other thread on sixspeedonline forum. All of the information is there and quite easy. Just take your time. You can mark your line on where you want to remove material with tape, and then just start cutting. :cheers:

Nice..thanks guys

Now what I am really after is oil pressure displayed on start up....is the blue tooth com up to that?( oil temp and alt as well)

Digital gauges that pretend to real ones I see all seem a bit cheesy. It would be great to to get simple graphics display in place B-767 style, racepak etc. style

There are a lot of gauge choices (and you can make your own style) with both Torque (android) and dash command (android, ios).

my '99 non-s doesnt support oil pressure or temp, but alt voltage and actual water temperature, engine vacuum, MAF air rate, timing, O2 sensor voltages etc are some of the good ones.

Did any of you have difficulty moving the radio down to the storage bin area? It seems like my cdr220 won't fit more than 3/4 of the way in the slot. Doesn't seem like anything blocking it and I don't want to push too hard.

I had that issue. There was a little tab sticking out in the lower shelf and I ended up filing it down to get the radio to slip in smoothly.

How do you keep it on ? , how do you get it to stay on and not go to sleep when driving ?

Im sorry if these are dumb questions but I do not know much about Ipads

Ipad mini in-dash installation
 

In setting-> general-> auto lock

Make the timeout never. You'll need to enable the accessibility switch control to lock it after the cR turns off though.

If the ipad is jail broken then you can download activator and have the ipad auto lock when the tablet stops charging (car turns off) and never lock while it's charging (car is on)

There are no dumb questions;) Like Shehadehd said, go to Settings>General>Autolock and select "Never" and the iPad will stay on.

Bruce when you had the original setup with the CDR220 and the iPod adapter did your mini charge? Mine will detect and play audio, but it says "not charging" next to the battery meter.

Yes, it charged. It also displayed not charging but it did in fact charge. It was nice because the CDR-220 always provided power to the iPad even with the key out of the ignition. My after market Pioneer only charges when the the ignition is on, so if I don't drive the car for several days, sometimes the iPad battery level is low.

jail broken
 

enlighten me ??

I found it, thanks

I would really like to do this instead of a double DIN install

Take a look at this thread:
iPad Mini in-dash install [996 MkII] - 6speedonline.com Forums

Lots of great information. I bought a used horseshoe and kept my original in case I want to go back to stock. Also didn't want to practice on my OEM horseshoe:eek: I bought it from Oklahoma Foreign on eBay. Take your time and it is all pretty easy. If you read through the above thread, you won't have a problem:cheers: