Leather Door Pocket Covers

[drbodzin]

Originally Posted by Slate 01

How much magnification does the template need in order to have it be the actually size required? Obviously what printed out was undersized to accurately fit the armrest. Can you throw me a bone and give this newb the details please

Hi,

The template should print the correct size at 100% zoom.

[Slate 01]

Originally Posted by drbodzin

Hi,

The template should print the correct size at 100% zoom.

Denied

[Slate 01]

That little spring on the Door storage compartment is a ******************** to put back on, I tried to reinstall for about hour and a half, finally gave up for today and take another whack at it tomorrow. Any suggestions?:ah:

[Spinnaker]

Originally Posted by Slate 01

That little spring on the Door storage compartment is a ******************** to put back on, I tried to reinstall for about hour and a half, finally gave up for today and take another whack at it tomorrow. Any suggestions?:ah:

Put the spring on the door with a dummy hinge pin that will get pushed out when you push in the actual hinge pin. The dummy pin will hold the spring in place while you are trying to line up the holes in the arm rest and the door.

[Slate 01]

Originally Posted by Spinnaker

Put the spring on the door with a dummy hinge pin that will get pushed out when you push in the actual hinge pin. The dummy pin will hold the spring in place while you are trying to line up the holes in the arm rest and the door.

Thanks, I figured it out prior to checking your response. Once I pulled my head out of my a$$ i noticed the little hole in the armrest where the spring end went. I put the spring end in the armrest first, then put the spring on the spindle, then inserted the front hinge pin first then the back hinge pin, worked like a charm.:dance:

Armrests look awesome, glad I did it, can't wait to complete interior pod cluster shade and center armrest.