TrafficPro GPS Installation DIY

[davej_anderson]

Originally Posted by wweirich

Q2: What connector needs to be connected to get the speed sensitive volume control (faster = louder) to work? I didn’t' see that in the TSB.

the speed signal is pin position A1 but that should be pre-wired for the standard becker head unit

[wweirich]

YES - prewired it is. I only had to adjust the GAT (? memory there... sorry) setting on the TrafficPro itself - required a little reading, a button held down - to access the settings.

So far - so good.

Still can NOT get the plastic IR cover up. I'm going to take it to the dealer, when I get extra key's cut and heads programmed for the remote, and have them do it - or show me. Enough already... as they say back in N.J.

Thanks to you all for your help. Great Board!

Regards,
Murphy