Need some help on suspension modifications please.
I have a basically stock 2004 986 S with 31,000 miles and have been bitten by the autocross bug this year. One of the items I did change was I went to 17" wheels and summer performance tires, replacing the all season tires.
Some of the photos I've seen of my car on the track looks like I am experiencing body roll. Tell me if I'm wrong. I would like to stiffen the car more but I also want to keep the car for street use as well. What would be some suggestions for improvement. I was thinking of a rear stabilizer or maybe a front stabilizer that mounts in the frunk. Please let me know your thoughts. http://986forum.com/forums/uploads02...1506449504.jpg http://986forum.com/forums/uploads02...1506449647.jpg |
Great question. For street use I like the S setup. There will be sacrifices in quality ride in street use when beefing up the suspension for track use. Other variables are how much money are you willing to spend and what street sacrifice are you willing to give up?
|
stiffer front sway bar. will reduce body roll and improve turn-in. will not detract from ride quality. m030 (there used to be a great chart that showed the relative thicknesses of the various bars) is good option that doesn't require special drop links. or a 996 gt3 front sway bar - will require aftermarket drop links, but is adjustable. don't use H&R - too stiff, too heavy.
don't mess with the rear (yet); the boxster tends to get tail happy quick when you start messing with it. also look at alignment - as much front camber as possible, keep rear about half degree less. the amount of adjustability (or lack thereof) will ensure that you won't get so much camber that your car gets darty or your tires start wearing funny. i think when you say 'stabilisers' you mean strut braces which are different - they are there to keep the top of your struts from pulling apart under hard cornering - don't think you are there yet. |
This page has chart for early cars through 2002.
CB-Racing, 986 Suspension Info Using this info, on my 2000s, i went with the m030 S front bar and the m030 non-S rear, (since it was stiffer than m030S bar) After that I installed ROW m030 springs and shorter sport shocks to lower the car a little. Felt just right for track days and still street-able. |
Here's a chart with the sway bar stiffness, that also includes the stiffness for the Eibach bars:
http://986forum.com/forums/511625-post9.html |
Sorta depends on how far you want to go with it. My 986 was in development for 10 years and I have spent a lot of time riding right seat in other peoples cars, both novice and top national drivers.
Some stuff I like: >The M030 kit including struts and sways, corner balance and alignment. It is a pretty great setup for a dual purpose car. It firms things up just enough for AX/DE but is still very street friendly. > Springs and GT3 A-arms, corner balance and alignment. This is what I have on my 987.2 now and it feels very much like the M030 kit with better camber settings and better tire wear. > PSS9 struts, comp sways, GT3 arms, corner balance and alignment. This is the Spec racing setup and works pretty well on track but is marginally street friendly. All of these work well if set up by a pro shop that knows these cars well. It will transform the cornering response of your car and make the most of your contact patch. Stuff I don't like that have made cars unbalanced and unruly in the corners: DIY setup changes including off brand struts, springs, or mismatched sways. The worst handling Boxsters ever have been DIY "tuner" setups by someone who thought they were making the car faster. If you want success in AX or TT, I ALWAYS recommend using a highly experienced shop with a history of putting cars on the podium. It just works. YMMV |
What autocross racing series or sanctioning body are you competing under, or plan to compete under? If you are serious about doing well in competition, my recommendation is to be mindful of whatever rules apply in your racing series. Making the "wrong" modification (e.g., in SCCA solo, putting aftermarket springs on a car which is otherwise "street" class compliant) can easily throw your car from competing in a class where it could have a chance of winning to a class where it has no chance.
If you don't really care about competing successfully, feel free to disregard. In any case, have fun!! |
Thank you all for your input and advice. A little more on my plans and thoughts. I'm on a limited budget so I will be doing little things as time and money permit. Jakeru, currently I'm just competing within our PCA region where I run in class C. At times, we participate in SCCA events where I am in STU. I would like to win occasionally but I'm never going to nationals or anything like that. Just trying to improve myself and get off the bottom of the rankings.
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
Quote:
If there is no sticker (for example there was a fender bender and the car got a new hood at some point) you could also look at the part number on the rear sway bar, it should be visible if you get down on the ground behind the car, and compare it with the part numbers on one of the sites with a parts lookup and diagrams. |
Quote:
Find a competent driving instructor and then get as much seat time as possible. A purely stock Boxster is incredibly capable and there isn't much point in improving the car unless your driving skills can take advantage of the car improvement. In fact, it can be a hinderance. The best gauge of progress is to track your lap times and compare to equal cars. If you're not at the top of that list, then its not the car that is holding you back. I did around 25 track days before I improved my original Boxster beyond better brake pads and performance tires. You'll know when you are better than the car and when the car is what is holding back your performance. THEN upgrade the car. I still follow this lesson to this day. Even after three seasons of racing Spec Boxster, I am not at the top of the leader board so I will continue to focus all of my efforts on improving my driving skills first and foremost. |
Quote:
|
Agree with Thstone. On a limited budget leave the suspension alone and run stock class. Mount the freshest tires that are competitive in your class, get a performance alignment to make the most of your contact patch, and get a top driver in your right seat for coaching. "Tuner" suspension changes will make no difference in lap times at this point. Always tighten the loose spacer behind the steering wheel before making changes to the car. :)
|
Looking at pictures of your car and thinking that it is leaning too much is normal. But body lean is also a good thing, as it provides good feedback. Some of the most difficult cars to drive quickly have really stiff set-ups, which tend to feel fine until the suddenly let go, because they don't give progressive feedback (especially for a novice).
Lots of good advice in the posts above, especially the bit about working on the driver first. |
[/QUOTE]
I did around 25 track days before I improved my original Boxster beyond better brake pads and performance tires. You'll know when you are better than the car and when the car is what is holding back your performance. THEN upgrade the car.[/QUOTE] Thstone, Topless, Rattan and Racer Boy, Thank you for your advice. I think i'll save save some money to devote to lessons instead of parts. I hope I can get to the point where I can recognize that the car is holding me back. (Or that this old man lives that long :) ) One question, where is a good place to look for an instructor for AX? I reside in eastern PA. |
Evolution all-day autocross school may be coming to your nearborhood at some point...
The Evolution Performance Driving School - Building Champions since 1993 - Autocross, Driver School, HPDE, License Your local SCCA region may also have educational events, or instructors who can ride along and critique your driving, or drive you car while you watch and observe and learn. I'm also just curious, what modification(s) did you make already which put you into SCCA Street Touring Unlimited class? |
I did around 25 track days before I improved my original Boxster beyond better brake pads and performance tires. You'll know when you are better than the car and when the car is what is holding back your performance. THEN upgrade the car.[/QUOTE]
Thstone, Topless, Rattan and Racer Boy, Thank you for your advice. I think i'll save save some money to devote to lessons instead of parts. I hope I can get to the point where I can recognize that the car is holding me back. (Or that this old man lives that long :) ) One question, where is a good place to look for an instructor for AX? I reside in eastern PA.[/QUOTE] Looks like you are in PCA Zone 2. Find an active AX region near you and contact their CDI. Let him know you are interested in improving your AX skills and would like to work with a qualified instructor. He will direct you from there. AUTOCROSS « Porsche Club of America, Zone 2 |
Quote:
The only modification I have made was changing wheel diameter and putting on some spacers and summer performance tires. I put it all in the thread below. Everything else is stock. http://986forum.com/forums/boxster-racing-forum/67760-wheel-fitment-spacers.html I went back to the SCCA classifications and I saw where my car is listed under STU class, but I also read the opening paragraph of the class that allows for suspension and engine modifications. What confused me was the C street list of applicable cars, where it states "Boxster (986 chassis, all) (1997-2004)". It doesn't call out the S version specifically as they do for other classes for different models. I guess I'm in the wrong class. Porsche 356 Carrera (4-cam) 911 (non-turbo, NOC) 911 Club Sport 914 (all) 928 (all) 944 (16v) 944 Turbo (all) Boxster (986 chassis, all) (1997-2004) Carrera 2 & Carrera 4 (964) (1989-94) C Street class (CS) Quote:
I looked at the other regions listed on the link you provided, it seems that Reisentoter (my current chapter) is the most active for Autocross. I'll check within the club, but I will also check with the SCCA. Thanks |
I think the "all" in "Boxster (986 chassis, all) (1997-2004)" means base and S models. However I think STU is a better class; If I run SCCA autocross again I will run in STU since the mods that I have done for HPDE move me out of the street class (used to be B Street for the 986 Boxster S)
|
Quote:
|
SCCA street class accommodates aftermarket wheels with a few allowances... see section 13.4:
http://cdn.growassets.net/user_files/scca/downloads/000/019/208/2017-01-30-Solo-Rules-complete-reduced.pdf?1485811400 Quote:
|
All times are GMT -8. The time now is 06:19 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website