WTB, track goodies
Looking for coil overs, strut brace, sway bars, etc for 00 S.
PM or email me with what you have. mike@lonestarrpm.com thanks, Mike |
I believe you posted in another thread you were looking for economical track mods. For cheap camber ($0), you can modify your existing stock camber plate and get 1.5 to 1.9 degrees of camber up front with the stock ride height. Lower the car with springs or coil overs, and you can get up to 3+ degrees with this mod.
If you are interested in the hack, press out the studs in the stock upper strut plate, drill the right sized holes about .44" over, and press studs in. Helps if you have a drill press, vice, and a long 13mm socket to press out the studs. I prefer this mod instead of slotting the camber holes in the sheet metal for cheap camber. Pierre |
Quote:
thx. Mike |
All times are GMT -8. The time now is 12:50 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website