I can't get the drive belt right, help please

[Travis]

With drive belt manually pre-tensioned, put it on in the following squence:

1. Coolant-pump drive pulley (#1)

2. Generator drive pulley (#2)

3. Deflection roller 1 (#3)

4. Power-steering pump drive pulley (#4)

5. Air-conditioning compressor drive pulley (#5)

6. Crankshaft pulley (#6)

7. Tensioning roller (#7)

Then turn the tensioning roller (#7) clockwise and simultaneously place the drive belt on the deflectotion roller 2 (#8)

Slowly relive the tensioning roller.

Check weather the belt is properly seated on all drive pulleys.

(Have not done this myself, just relaying the information I have.)