986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)
-   -   Part # or name (http://986forum.com/forums/showthread.php?t=86860)

DWBOX2000 02-02-2025 08:11 AM

Part # or name
 
When removing the front right wheel liner, there is a black plastic push rivot that goes through a hole in the liner and then into the body of the car. Visually located right behind the strut/spring. Where the push rivet goes into the body, there is a a hole in the sheet metal about an inch in diameter. Something was in that hole that the push river went into.
Anyhow know the part?
I tried various diagrams but must be picking the wrong ones.
Thanks.

DWBOX2000 02-03-2025 03:45 AM

Okay, I’ll go to dealership and report back.

997_986 02-03-2025 04:08 AM

999 507 497 40

DWBOX2000 02-03-2025 03:35 PM

Thanks but that look like the part that goes through the panel, not the part that goes through the 1” whole in the body. Hard to tell.
I went to Porsche, they were stumped. They were suppose to talk to a tech and get back to me, maybe tomorrow.

DWBOX2000 02-03-2025 04:01 PM

Abort the mission. Sorry, looking at pictures I noticed there might be a 2nd hole. Well I jacked up and there it was. There is still that 1” hole in the body. Surprised there is not a plug for it. I’ve seen it in other pictures so I guessing the hole is suppose to be open.
Again, my apologies. It stinks when the eyes start to go.


All times are GMT -8. The time now is 08:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website