Re anti roll bar bushes
1 Attachment(s)
Hi
I have purchased a pair of 3.2s 986 front ARBs I plan to refurbish them back to bare metal and re paint and replace them with my 3.2s ones. My issue is buying new bushes for them. There are 3 sizes for the rears alone at 18.7mm 19.2 and 19.8. So with such small tolerances how the hell are you supposed to know which ones to use. Same with the fronts. My only thoughts would be the part number on the securing brackets and match to them. Then I have issue of Putting paint on at correct thickness ? Any advice appreciated |
Looking at the parts catalog, it's going to depend on which year and transmission the ARB came from, as there seems to be 4 or 5 different sizes of ARB.
|
Calipers on your bars and Tom Stone's post in this thread may be useful: https://986forum.com/forums/boxster-general-discussions/72447-sway-bars.html
|
All times are GMT -8. The time now is 08:27 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website