Cam timing
 

I need an experts opinion . I installed the cams with 7 links between the dots on the camshafts with the crank locked at the correct position for bank 1 then rotated the crank 360 and locked the crank and installed the cams for bank 2 . Are these timing marks close enough ? Thank you all don't want any more problems .http://986forum.com/forums/uploads02...1607985669.jpg

second pic

I`m certainly not an expert here, but on a 5 chain engine there should be 6 links in between the intake and exhaust cam marks... how did you count 7?

Useful links, just in case:

Install Head 4-6
http://986forum.com/forums/show-tell-gallery/73917-blue-boxster-resurrection-project-3.html

Just like in your the first link from the dot its on is one then the last link one the second dot is 7 ...6 links in between the dots yes ..

Ok, I think you should be good then. Rotate the crankshaft a couple times and make sure the camshafts line up at TDC.