Anyone have a wheel bearing tool to rent?

[Gilles]

Originally Posted by Quadcammer

Then I used a slide hammer to get hub out.
I was dreading this job, but it was easy peasy with these tools.

Removing the hub with a slide hammer is straight up job, but a bear of a job none the less (at least for me..)

Another option is to remove the entire hub assembly and take it to your favorite alignment/tire shop and they will do it very quickly on a hydraulic press

PS: If this was my car I would replace the seals 'on both sides' of the tranny as both are the same age

Good Luck!

[steved0x]

Originally Posted by Gilles

Removing the hub with a slide hammer is straight up job, but a bear of a job none the less (at least for me..)

Another option is to remove the entire hub assembly and take it to your favorite alignment/tire shop and they will do it very quickly on a hydraulic press

PS: If this was my car I would replace the seals 'on both sides' of the tranny as both are the same age

Good Luck!

And using the slide hammer, no need to take off the pesky parking brake shoes...