986 Forum - The Community for Porsche Boxster & Cayman Owners

Page 2 of 2

Show 40 post(s) from this thread on one page

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)

- Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)

- - Clunk when backing left (http://986forum.com/forums/showthread.php?t=76954)

Anker

01-13-2020 03:20 PM

Terrific Tailwind!

Glad you got it fixed!

Congratulations/Anker

Starter986

01-13-2020 03:22 PM

Quote:

Originally Posted by Tailwind (Post 609918)

So I got the car in the air and re-checked the torque on all the bolts on the front cross member. They were all tight, except the two that bolt the rear of the cross member to the body - those could take some more torque (up to spec).
Symptom gone :)

Awesome! Inexpensive fixes are the best!

jaykay

01-13-2020 05:45 PM

Wow...pictures please

Tailwind

01-14-2020 07:43 AM

Quote:

Originally Posted by jaykay (Post 609935)

Wow...pictures please

http://986forum.com/forums/uploads02...1579020205.jpg

jaykay

01-14-2020 02:31 PM

Thanks never would guessed at that being an issue. Do you think you need to re align or confirm set up?

Racer Boy

01-14-2020 08:51 PM

It shouldn't need to re-aligned. All the other bolts were tight, so the crossmember wasn't moving laterally.

Tailwind

01-15-2020 04:26 AM

Took it to alignment because I replaced the Tie Rods. Those I did not do during the suspension rebuild, so hoped these would eliminate it, but it did not.

All times are GMT -8. The time now is 05:55 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website