Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-01-2019, 07:22 AM   #1
Woz
Registered User
 
Join Date: Mar 2012
Location: RI
Posts: 13
Seat replacement ???

I have a 2000 986 s with cracked seats.

Can Porsche seats from "recent" years fit with a bracket adjustment?

The replacement covers are my first option... Used seats in "good" shape are available.
Can they be made to fit?

I know "anything" can be done for a cost...

Anybody switch seats?

Woz:

Woz is offline   Reply With Quote
Old 04-01-2019, 11:06 PM   #2
Registered User
 
Join Date: Jun 2018
Location: San Antonio, Texas
Posts: 81
All 996 seats are a direct swap. 997 seats are also a direct swap but you want to make sure you get manual seats (manual front and rear with power recline). The only limit it width on ither aftermarket seats. I have recaro sportster cs seats from an EVO IX in my boxster on planets seat brackets. Ebay has a ton tod cayman seats available for 5-800$ and offer a substantial upgrade over stock.
Good luck
Shawn
__________________
-1999 Boxster 3.4L swap/NHP Headers/Fabspeed maxflow/ Coilovers/GT3 arms/adj. rear toe links/Tarret front and rear bar/UIDS/UAOS
-2002 911 Turbo -JRZ RS Pro/GMG swaybars/RSS/Billet k16s/ Markski turbo inlet pipe, tune, 3” exhaust, intercoolers/GT3 seats w/red GT3 belts/CCW classics
Sveach756 is offline   Reply With Quote
Old 04-02-2019, 03:52 AM   #3
Woz
Registered User
 
Join Date: Mar 2012
Location: RI
Posts: 13
Thanks Shawn:

I'm willing to spend a grand... Just not $3,000 to cover current manual seats.
Best buy, fit, look, for under $1,500.00

Just retired and will now have the time to Spring, Summer, Fall drive.
Woz is offline   Reply With Quote
Old 04-02-2019, 08:32 AM   #4
Registered User
 
lkchris's Avatar
 
Join Date: Jan 2014
Location: Albuquerque, NM, USA
Posts: 730
I replaced my deteriorated vinyl seats with ~90% full leather 986/996 seats via ebay purchase from qualityporscheparts. This was less expensive than purchasing even one recover kit from Porsche.

Had to visit local upholstery shop to transfer over the seat heating elements, so there was that expense, but I'm still happy.

You'll set an airbag warning light doing this should you cycle ignition on while a seat is electrically disconnected.
__________________
Kent Christensen
Albuquerque
2001 Boxster
2007 GL320 CDI, 2010 CL550
2 BMW motorcycles
lkchris is offline   Reply With Quote
Old 04-02-2019, 05:21 PM   #5
Registered User
 
KevinH1990's Avatar
 
Join Date: Feb 2006
Location: Virginia
Posts: 1,659
Here’s a link to information I compiled while working on my seat upgrades: https://rennlist.com/forums/boxster-and-boxster-s-986-forum/915206-upgrading-two-way-power-seats.html

If you are interested in installing 997 or 987 seats there is good information here: https://www.pelicanparts.com/techarticles/box_997_seats/box_997_seats.htm
__________________
2000 Arctic Silver/Black, Hard Top, On Board Computer
PNP Rear Speakers, HAES 6-Channel Amp, Avic Z140BH,
Painted Bumperettes, 2004 (OEM) Top, Homelink integrated in dash with Targa switch, 997 Shifter, Carrera Gauge Cluster with silver gauge faces, heated 12-way driver & 8-way passenger seats, Litronics, silver console
KevinH1990 is online now   Reply With Quote
Old 04-03-2019, 04:23 AM   #6
Registered User
 
morgal48's Avatar
 
Join Date: Jan 2014
Location: Texas
Posts: 221
How cracked? My seats are cracked and worn and I'm trying "Leatherique". Started last evening and hope to have them cleaned and ready for a little dye later today. So far, the cracks have improved, now just creases (not parsing words, just not sure how to describe). If it works, less than $100. IIRC installing 987/997 seats requires some fiddling with the seat electrical connector to make the connection.
__________________
2000 Boxster S
2010 Volvo XC60
2011 GMC Denali HD 6.6L (sold)
2008 Cayenne S (sold)
1989 Targa (sold)
morgal48 is offline   Reply With Quote
Old 04-03-2019, 10:10 AM   #7
Registered User
 
Join Date: Oct 2015
Location: Scituate MA
Posts: 870
I just pulled black leather stock seats from my 2000 Box S. I replaced for Sport seats. Nothing wrong with them, just wanted sport seats. Wish my sports were as good of shape as my Sports. They have approx 55k on them.

If you are interested in buying, I can take pictures.

I was going to keep for future owner after I pass , but I just don't have the room.

David
DWBOX2000 is offline   Reply With Quote
Old 04-03-2019, 10:12 AM   #8
Registered User
 
Join Date: Oct 2015
Location: Scituate MA
Posts: 870
Heck, I'm in MA so easy for you to see if interested. No shipping.
DWBOX2000 is offline   Reply With Quote
Old 04-03-2019, 12:01 PM   #9
Registered User
 
Join Date: Jul 2017
Location: Tucson AZ
Posts: 536
I got mine from an Ebay seller located in Albuquerque. About 600 bucks for vinyl, plane jane seats. Not exactly like new, but good enough and better than the old ones.
__________________
2001 Boxster
2007 Toyota Highlander
2003 New Beetle Convertible, Turbo, Tip 6 speed
Brian in Tucson is offline   Reply With Quote
Old 04-04-2019, 04:56 AM   #10
Registered User
 
Join Date: Oct 2015
Location: Scituate MA
Posts: 870

DWBOX2000 is offline   Reply With Quote
Old 04-05-2019, 03:50 AM   #11
MYRX
 
Join Date: Dec 2018
Location: Winterville, GA
Posts: 44
I contacted "Leatherique" as mentioned in another forum. I have leather seats in my 2000 S. The Leatherique products worked for me. The drivers side had normal wear and some minor cracks. The passenger side was in mint condition. The rejuvenator and cleaner they supplied along with the dye and crack repair are very good products. Check out their web site.
MYRX is offline   Reply With Quote
Old 04-06-2019, 03:36 AM   #12
Woz
Registered User
 
Join Date: Mar 2012
Location: RI
Posts: 13
I found two Black '03 seats in CT.

I wish I had the DBOX reply prior to my pick up. I will have Savanah seats for a 2000 s available in RI.

I have yet to attempt the install of the '03 into the '00. Will I have any issues?

I'm also thinking of taking out the back of the old seats and creating a two / tone seat look. Just thinking about it.

I'll keep you posted.

Woz
Woz is offline   Reply With Quote
Old 04-06-2019, 04:20 AM   #13
Registered User
 
KevinH1990's Avatar
 
Join Date: Feb 2006
Location: Virginia
Posts: 1,659
Quote:
Originally Posted by Woz View Post
I

I have yet to attempt the install of the '03 into the '00. Will I have any issues?

Woz
No as long as the seats have similar features. If the new seats are an upgrade (e.g. you are upgrading from 2-way power to 8-way power) you will need to address some electrical wiring issues.
__________________
2000 Arctic Silver/Black, Hard Top, On Board Computer
PNP Rear Speakers, HAES 6-Channel Amp, Avic Z140BH,
Painted Bumperettes, 2004 (OEM) Top, Homelink integrated in dash with Targa switch, 997 Shifter, Carrera Gauge Cluster with silver gauge faces, heated 12-way driver & 8-way passenger seats, Litronics, silver console
KevinH1990 is online now   Reply With Quote
Old 04-08-2019, 12:25 PM   #14
Woz
Registered User
 
Join Date: Mar 2012
Location: RI
Posts: 13
New, '03 seats installed into the '00 without a hitch! I removed the center back Savannah color '00 seat that fit perfectly into the center of the '03 Black.

When the sun comes out I will send pics.

What should I harvest off of the '00 seats? Does anyone need ???

Woz
Woz is offline   Reply With Quote
Old 04-10-2019, 03:42 AM   #15
Woz
Registered User
 
Join Date: Mar 2012
Location: RI
Posts: 13
New seat conversion

Old 2000 replaced with new '03.
I used the center back from '00 that fit just fine.

I thought I had a pic attached... It says it will take a while...


Last edited by Woz; 04-10-2019 at 03:44 AM. Reason: pic attach ???
Woz is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page