| 
        | 
 
 
	
	
		
	
	
	
		|  04-01-2019, 07:22 AM | #1 |  
	| Registered User 
				 
				Join Date: Mar 2012 Location: RI 
					Posts: 13
				      | 
				
				Seat replacement ???
			 
 
			I have a 2000 986 s with cracked seats. 
Can Porsche seats from "recent" years fit with a bracket adjustment?
 
The replacement covers are my first option... Used seats in "good" shape are available. 
Can they be made to fit?
 
I know "anything" can be done for a cost...
 
Anybody switch seats?
 
Woz:
 |  
	|   |   |  
	
		
	
	
	
		|  04-01-2019, 11:06 PM | #2 |  
	| Registered User 
				 
				Join Date: Jun 2018 Location: San Antonio, Texas 
					Posts: 81
				      | 
			All 996 seats are a direct swap. 997 seats are also a direct swap but you want to make sure you get manual seats (manual front and rear with power recline). The only limit it width on ither aftermarket seats. I have recaro sportster cs seats from an EVO IX in my boxster on planets seat brackets. Ebay has a ton tod cayman seats available for 5-800$ and offer a substantial upgrade over stock. Good luck
 Shawn
 
				__________________-1999 Boxster 3.4L swap/NHP Headers/Fabspeed maxflow/ Coilovers/GT3 arms/adj. rear toe links/Tarret front and rear bar/UIDS/UAOS
 -2002 911 Turbo -JRZ RS Pro/GMG swaybars/RSS/Billet k16s/ Markski turbo inlet pipe, tune, 3” exhaust, intercoolers/GT3 seats w/red GT3 belts/CCW classics
 |  
	|   |   |  
	
		
	
	
	
		|  04-02-2019, 03:52 AM | #3 |  
	| Registered User 
				 
				Join Date: Mar 2012 Location: RI 
					Posts: 13
				      | 
			Thanks Shawn:
 I'm willing to spend a grand... Just not $3,000 to cover current manual seats.
 Best buy, fit, look, for under $1,500.00
 
 Just retired and will now have the time to Spring, Summer, Fall drive.
 |  
	|   |   |  
	
		
	
	
	
		|  04-02-2019, 08:32 AM | #4 |  
	| Registered User 
				 
				Join Date: Jan 2014 Location: Albuquerque, NM, USA 
					Posts: 746
				      | 
			I replaced my deteriorated vinyl seats with ~90% full leather 986/996 seats via ebay purchase from qualityporscheparts.  This was less expensive than purchasing even one recover kit from Porsche.
 Had to visit local upholstery shop to transfer over the seat heating elements, so there was that expense, but I'm still happy.
 
 You'll set an airbag warning light doing this should you cycle ignition on while a seat is electrically disconnected.
 
				__________________Kent Christensen
 Albuquerque
 2001 Boxster
 2007 GL320 CDI, 2010 CL550
 2 BMW motorcycles
 |  
	|   |   |  
	
		
	
	
	
		|  04-02-2019, 05:21 PM | #5 |  
	| Registered User 
				 
				Join Date: Feb 2006 Location: Virginia 
					Posts: 1,748
				      | 
				__________________2000 Arctic Silver/Black, Hard Top, On Board Computer
 PNP Rear Speakers, HAES 6-Channel Amp, Avic Z140BH,
 Painted Bumperettes, 2004 (OEM) Top, Homelink integrated in dash with Targa switch, 997 Shifter, Carrera Gauge Cluster with silver gauge faces, heated 997 adaptive sports seats, Litronics, silver console
 |  
	|   |   |  
	
		
	
	
	
		|  04-03-2019, 04:23 AM | #6 |  
	| Registered User 
				 
				Join Date: Jan 2014 Location: Texas 
					Posts: 221
				      | 
			How cracked?  My seats are cracked and worn and I'm trying "Leatherique".  Started last evening and hope to have them cleaned and ready for a little dye later today.  So far, the cracks have improved, now just creases (not parsing words, just not sure how to describe).  If it works, less than $100.  IIRC installing 987/997 seats requires some fiddling with the seat electrical connector to make the connection.
		 
				__________________2000 Boxster S
 2010 Volvo XC60
 2011 GMC Denali HD 6.6L (sold)
 2008 Cayenne S (sold)
 1989 Targa (sold)
 |  
	|   |   |  
	
		
	
	
	
		|  04-03-2019, 10:10 AM | #7 |  
	| Registered User 
				 
				Join Date: Oct 2015 Location: Scituate MA 
					Posts: 932
				      | 
			I just pulled black leather stock seats from my 2000 Box S.  I replaced for Sport seats.  Nothing wrong with them, just wanted sport seats.  Wish my sports were as good of shape as my Sports.  They have approx 55k on them.  
If you are interested in buying, I can take pictures.
 
I was going to keep for future owner after I pass   , but I just don't have the room.
 
David
		 |  
	|   |   |  
	
		
	
	
	
		|  04-03-2019, 10:12 AM | #8 |  
	| Registered User 
				 
				Join Date: Oct 2015 Location: Scituate MA 
					Posts: 932
				      | 
			Heck, I'm in MA so easy for you to see if interested.  No shipping.
		 |  
	|   |   |  
	
		
	
	
	
		|  04-03-2019, 12:01 PM | #9 |  
	| Registered User 
				 
				Join Date: Jul 2017 Location: Tucson AZ 
					Posts: 536
				      | 
			I got mine from an Ebay seller  located in Albuquerque.  About 600 bucks for vinyl, plane jane seats.   Not exactly like new, but good enough and better than the old ones.
		 
				__________________ 
				2001 Boxster 
2007 Toyota Highlander  
2003 New Beetle Convertible, Turbo, Tip 6 speed   |  
	|   |   |  
	
		
	
	
	
		|  04-04-2019, 04:56 AM | #10 |  
	| Registered User 
				 
				Join Date: Oct 2015 Location: Scituate MA 
					Posts: 932
				      |  |  
	|   |   |  
	
		
	
	
	
		|  04-05-2019, 03:50 AM | #11 |  
	| MYRX 
				 
				Join Date: Dec 2018 Location: Winterville, GA 
					Posts: 44
				      | 
			I contacted "Leatherique" as mentioned in another forum.  I have leather seats in my 2000 S. The Leatherique products worked for me. The drivers side had normal wear and some minor cracks. The passenger side was in mint condition. The rejuvenator and cleaner they supplied along with the dye and crack repair are very good products.  Check out their web site.
		 |  
	|   |   |  
	
		
	
	
	
		|  04-06-2019, 03:36 AM | #12 |  
	| Registered User 
				 
				Join Date: Mar 2012 Location: RI 
					Posts: 13
				      | 
			I found two Black '03 seats in CT.
 I wish I had the DBOX reply prior to my pick up. I will have Savanah seats for a 2000 s available in RI.
 
 I have yet to attempt the install of the '03 into the '00. Will I have any issues?
 
 I'm also thinking of taking out the back of the old seats and creating a two / tone seat look. Just thinking about it.
 
 I'll keep you posted.
 
 Woz
 |  
	|   |   |  
	
		
	
	
	
		|  04-06-2019, 04:20 AM | #13 |  
	| Registered User 
				 
				Join Date: Feb 2006 Location: Virginia 
					Posts: 1,748
				      | 
			
	Quote: 
	
		| 
					Originally Posted by Woz  I 
 I have yet to attempt the install of the '03 into the '00. Will I have any issues?
 
 Woz
 |  
No as long as the seats have similar features.  If the new seats are an upgrade (e.g. you are upgrading from 2-way power to 8-way power) you will need to address some electrical wiring issues.
		 
				__________________2000 Arctic Silver/Black, Hard Top, On Board Computer
 PNP Rear Speakers, HAES 6-Channel Amp, Avic Z140BH,
 Painted Bumperettes, 2004 (OEM) Top, Homelink integrated in dash with Targa switch, 997 Shifter, Carrera Gauge Cluster with silver gauge faces, heated 997 adaptive sports seats, Litronics, silver console
 |  
	|   |   |  
	
		
	
	
	
		|  04-08-2019, 12:25 PM | #14 |  
	| Registered User 
				 
				Join Date: Mar 2012 Location: RI 
					Posts: 13
				      | 
			New, '03 seats installed into the '00 without a hitch! I removed the center back Savannah color '00 seat that fit perfectly into the center of the '03 Black.
 When the sun comes out I will send pics.
 
 What should I harvest off of the '00 seats? Does anyone need ???
 
 Woz
 |  
	|   |   |  
	
		
	
	
	
		|  04-10-2019, 03:42 AM | #15 |  
	| Registered User 
				 
				Join Date: Mar 2012 Location: RI 
					Posts: 13
				      | 
				
				New seat conversion
			 
 
			Old 2000 replaced with new '03. I used the center back from '00 that fit just fine.
 
 I thought I had a pic attached... It says it will take a while...
 
 
				 Last edited by Woz; 04-10-2019 at 03:44 AM.
					
					
						Reason: pic attach ???
 |  
	|   |   |  
	
		
	
	
	
	
	| 
	|  Posting Rules |  
	| 
		
		You may not post new threads You may not post replies You may not post attachments You may not edit your posts 
 HTML code is On 
 |  |  |  All times are GMT -8. The time now is 03:41 AM. 
	
	
		
	
	
 |  |